Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sparksalot
Supporting Member
What roof rack did you add?
I found a used on one ebay. Then I used stainless steel nutserts to attach it back to the roof. Needed a way to carry our SUP's and surf boards.
- Joined
- Dec 8, 2016
- Posts
- 3,851
- Reaction score
- 4,804
Welcome from Miami Beach Justin!
Nice PPV! The hood and the top look good wrapped. Seems your PPV was well maintained before you got it. Looks like it was highway unit.
Sparksalot
Supporting Member
Was it difficult to line up, or did it tend to just land in the right spots on the roof?
I'm thinking the same thing for thecopcar. I have a 16 foot wooden kayak I need to use more often.
Was a Supervisors unit from a Sheriff's Dept. in Texas. Lucked out for sure.
Not hard at all. Laid it out first with some 2 inch wide painters tape and then marked it out before any drilling was done.
When I added my roof rack, I purchased a nutsetter kit from Amazon, which is a must. To get measurements right, I found a Tahoe with the factory rack and took a bunch of measurements from all angles. Ultimately you assemble the rack with the middle crossbars and place on roof. With the help of a friend, it kind of finds its way to wanting to be straight.
Sparksalot
Supporting Member
I figured something like that. It just settles into place, and drill there.
Similar threads
