- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
I have some parts here from roel at belltech and my 6 inch springs and some other items id like to test out on the truck. Belltech doesn't have a truck to test parts on so ill just give it a shot and shoot back some info. Im wondering if there is anyone local that can lend me their truck for about 2 days so I can not assume will work but actually test fit the items. If your local and can leave the truck for 2 days I would take care of all labor/alignment all you would do is pay for part.
I can make the rear adjustable from 4-6 inches and front I can do my drop strut mod for 0-2 inches adjustable. The new design 2511 belltech spindle I would like to test fit also. I will also be doing the free travel mod on your truck so know that I would be cutting the rear bracket off the frame and I will include the bumpstops to replace oem in the rear so you wont be bottoming out axle to frame. Also if you tow or load it up no problem I can set that up also with the airlift helper bags.
If your interested and can part with your baby for a few days just holler back.
Thanks
Tony
I can make the rear adjustable from 4-6 inches and front I can do my drop strut mod for 0-2 inches adjustable. The new design 2511 belltech spindle I would like to test fit also. I will also be doing the free travel mod on your truck so know that I would be cutting the rear bracket off the frame and I will include the bumpstops to replace oem in the rear so you wont be bottoming out axle to frame. Also if you tow or load it up no problem I can set that up also with the airlift helper bags.
If your interested and can part with your baby for a few days just holler back.
Thanks
Tony
Last edited:
