2023 Stock Z71 with 285/60R20

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Spanman

TYF Newbie
Joined
Jan 31, 2022
Posts
19
Reaction score
8
Location
Massachusetts
Love the Copper look.
Did the tire size or brand change, give less of a smooth ride on hwy?
Did it change any built in Z71 digital controls?
Did you try them in the 4wheel drive mode yet?
Thx in advance
 
OP
OP
I

IronWill42

TYF Newbie
Joined
Aug 29, 2023
Posts
6
Reaction score
9
Love the Copper look.
Did the tire size or brand change, give less of a smooth ride on hwy?
Did it change any built in Z71 digital controls?
Did you try them in the 4wheel drive mode yet?
Thx in advance
I have not noticed any change in driving manners on the highway. They drive pretty damn smooth. It did not change any built in controls that I can tell but I have not used 4WD since putting them on.
 

TrueAt1stLight

Full Access Member
Joined
Oct 31, 2020
Posts
354
Reaction score
375
Location
Minneapolis
What pressure are you running? I purchased a set of BFGoodrich AT’s in the same size and was told by the tire shop I should be running 50 psi or more in them to avoid cupping.
 

nick14226

Full Access Member
Joined
Nov 22, 2019
Posts
243
Reaction score
237
What pressure are you running? I purchased a set of BFGoodrich AT’s in the same size and was told by the tire shop I should be running 50 psi or more in them to avoid cupping.
You do need higher pressure because you went from SL’s to LT’s for proper load carrying. Cupping, don’t know about that, and 50 psi sounds high, but in the 40’s is typical. These guys made it easy so you don’t have to look up the new pressure on a load chart.

 

TrueAt1stLight

Full Access Member
Joined
Oct 31, 2020
Posts
354
Reaction score
375
Location
Minneapolis
You do need higher pressure because you went from SL’s to LT’s for proper load carrying. Cupping, don’t know about that, and 50 psi sounds high, but in the 40’s is typical. These guys made it easy so you don’t have to look up the new pressure on a load chart.

AMAZING!!!! Thanks for that tool. Wow, is that helpful.
 

Dbow555

TYF Newbie
Joined
Sep 20, 2024
Posts
1
Reaction score
0
New to the Forum!

Great information on the tire size upgrades to 285/60/20 with the Cooper AT3 XLT.

Currently have a 23 Tahoe Z71 (without the air ride) looking to get the Newer BFGoodrich TA KO3 tires. Problem is that tire does not come in the 275/60/20 yet. Is there a chance that the KO3 in 285/60/20 on the stock rims could cause a rubbing issue? (On Control Arm based on width, or at full locks with Husky Liner Splash Guards)

Looking for some experiences or other things I may be not thinking about before I spend $1600+ on a set of tires that may rub.

Also, did notice that the OEM SL Goodyear Territory ATs had a slightly larger diameter than other 275/60/20 tires.

Thanks!
 

Forum statistics

Threads
132,768
Posts
1,873,941
Members
97,605
Latest member
audley71
Top