2023 Z71 Tahoe Stock 26x12????

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GPZ71

TYF Newbie
Joined
Aug 26, 2024
Posts
3
Reaction score
0
Hey everyone. I’d like to fit a pair of 26x12 rims on my factory Tahoe equipped with Air Ride and Mag suspension from the factory. I know I can fit a 10” width but I’d like to install some 26x12. Has anyone done so with no level or lift. All factory?
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,353
Reaction score
9,944
I cannot advise you one way or the other for sure, but I think 12 may be a bit wide, and you may need to use spacers.

@Trey Hardy May be able to give you some thoughts and perspectives regarding your 26x12 rims.
 

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50
Joined
Jun 12, 2020
Posts
3,342
Reaction score
8,940
Location
Eastern North Carolina
Hey everyone. I’d like to fit a pair of 26x12 rims on my factory Tahoe equipped with Air Ride and Mag suspension from the factory. I know I can fit a 10” width but I’d like to install some 26x12. Has anyone done so with no level or lift. All factory?
There’s a fella on here with a orange at4 running 26x14s on 33s I think all he has is a leveling kit if even that so as long as you stay with a 305 or 33” no bigger you should be good and worse case throw a 2” leveling kit under the strut. I think I’ve read where some people use zip ties to pull the bottom of the fender liner back also to prevent rubbing
I say go for it
 

ProfeZZor X

Full Access Member
Joined
Jan 19, 2022
Posts
502
Reaction score
415
Location
High Country
There’s a fella on here with a orange at4 running 26x14s on 33s I think all he has is a leveling kit if even that so as long as you stay with a 305 or 33” no bigger you should be good and worse case throw a 2” leveling kit under the strut. I think I’ve read where some people use zip ties to pull the bottom of the fender liner back also to prevent rubbing
I say go for it
I'm running 24x14's, not 26's. I wanted 26's but I didn't want to change my ride height by much. And I don't have the air ride suspension, just the mag suspension with a 3" Ready Lift kit. At my current setup, I top out at 6'6"... enough to clear most parking structures.
 
Last edited:

Forum statistics

Threads
132,398
Posts
1,867,401
Members
97,051
Latest member
legit_b
Top