2024 Yukon Denali 22" Tire and Level consideration...need some input

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HopheadFury

TYF Newbie
Joined
Aug 7, 2024
Posts
12
Reaction score
11
Thanks in advance...been following and plowing through a ton of threads, but none are quite on the mark for me.

I have the non-ultimate Denali with Magnaride, not air suspension. 275/50r22 Bridgestone alenzas on it right now, but I'm wanting to put on an AT tire (Toyo AT3's, Nitro Recon's, or Continental TerrainAT)...what's the biggest size of these that will fit on my OEM wheels without trimming or lift/level? I was considering a level but the Dealership service guys are telling me with the Magnaride, any level will have a pretty tremendous impact on ride quality...so thats got me spooked into just putting tires on stock. Need some feedback on these issues...and any pics you've got of your similar setup and solutions are greatly appreciated.

Bringing my ride in next week to paint the remaining chrome grille and surround gloss black to standout off the satin wrap. Tires to be immediately done once I get this whole thing settled in my head with how it will look/function best.


IMG_8112.jpg
 
Last edited:

jgraves

Full Access Member
Joined
Nov 19, 2021
Posts
121
Reaction score
80
They should fit on stock wheels w/o lift if you install a fender liner pull-back kit (see Westcott Designs website and YouTube channel). They are the same height and a bit narrower than the 315/70R17 I run for winter. I've only rubbed while turning sharply, braking and hitting a bump at the same time.

My thread on tire fitment.

Jeff
 
OP
OP
HopheadFury

HopheadFury

TYF Newbie
Joined
Aug 7, 2024
Posts
12
Reaction score
11
thanks for the assist throughout the forum...got some new shoes put on this weekend. Didn't want to mess with the suspension, so this worked out great. Went with 305/45r22, drive is great and no road noise to speak of
IMG_8252.jpeg
 

plimeclume

TYF Newbie
Joined
Feb 11, 2025
Posts
1
Reaction score
0
Any rubbing at all? I'm in the same boat. Don't want to lift magnaride. I was looking at toyo at3 275/50 r22 (stock size) or 285/50 r22. On toyo website, it says 305/45R22 are for a 9.5 to 11.5 rim. Our rims are 9". Any issues with that?
 

KMeloney

Full Access Member
Joined
May 2, 2009
Posts
3,084
Reaction score
423
For the record, I don't know that asking the dealership about aftermarket parts is going to be particularly useful. That's not to say that they are flat-out wrong about the ride quality with the addition of any kind of lift -- but I'd be looking for the opinions of folks who have added a lift themselves.
 

Forum statistics

Threads
134,035
Posts
1,895,430
Members
99,488
Latest member
waterbug99

Latest posts

Top