21+ Tahoe LED Tail Lights

[Tenscourts]

It's still not up on their website yet.

I would just call the number on the website. I don't know what the holdup is on getting the listing on the site. He's told me multiple times he would have it up in a few days and so far he hasn't gotten it up there yet. But he did tell me he's already sold a set to somebody else based on them reaching out to him.

 

[Deuce16GMCs]

@Tenscourts

I just want to confirm that these are connectors for the harness you plugged into on the Tahoe.

Also, on the drivers side, coming off the connector, there another leg that has a 2 pin connector that connects to nothing.

Do you know what this 2 pin is supposed to connect to?

 

[Tenscourts]

@Tenscourts

I just want to confirm that these are connectors for the harness you plugged into on the Tahoe.

Also, on the drivers side, coming off the connector, there another leg that has a 2 pin connector that connects to nothing.

Do you know what this 2 pin is supposed to connect to?

Those are the connectors and I have a guess on the 2 pin but I'm not 100%. The Yukons have brake lights that extended into the liftgate. I believe the 2 pin may be where the wiring to trigger those brake lights connect but it's only a guess. I have the empty 2 pin as well.

 

[Tenscourts]

If anyone calls or emails to order let me know how it goes. I still don't see the listing on the site.

 

[Tinbadtin]

I emailed them and received a response that the harness will be posted on their website on Tue.

 

[Tenscourts]

21-24 Suburban/Tahoe LED Taillight Harness

Have you added LED bulbs to your 21-24 Suburan/Tahoe taillights and now have a hyper flash issue as well as error codes. Gen5DIY has your solution with this plug and play harness. This harness includes resistors for the stop lamp circuit, the turn signal circuit as well as the reverse light...

www.gen5diy.com

They are on the site! He sent me the link today.

 

[Tinbadtin]

21-24 Suburban/Tahoe LED Taillight Harness

Have you added LED bulbs to your 21-24 Suburan/Tahoe taillights and now have a hyper flash issue as well as error codes. Gen5DIY has your solution with this plug and play harness. This harness includes resistors for the stop lamp circuit, the turn signal circuit as well as the reverse light...

www.gen5diy.com

They are on the site! He sent me the link today.

Just came here to say the same thing. Ordering later today!

 

[Tinbadtin]

My harness was shipped today. Completely forgot to order the actual LEDs so doing that that now too.

 

[Tinbadtin]

Received the harness on Monday and the LEDs from Diode Dyanmics today. Installed this afternoon and everything works as advertised.

Just like @Tenscourts in the video, I used 3M double sided tape to attach the resistors rather than drilling holes in the metal. The hardest part was pulling out the existing harness connectors, they were stuck pretty good!!

Between the harness and LEDs it’s a ~$400 mod so definitely not cheap but for me worth it. I’m hoping spending the extra $$ on quality LEDs will pay off long term and they will last a long time.

Thanks Tenscourts and everyone else in this thread for all the tips and info!

 

[Deuce16GMCs]

Received the harness on Monday and the LEDs from Diode Dyanmics today. Installed this afternoon and everything works as advertised.

Just like @Tenscourts in the video, I used 3M double sided tape to attach the resistors rather than drilling holes in the metal. The hardest part was pulling out the existing harness connectors, they were stuck pretty good!!

Between the harness and LEDs it’s a ~$400 mod so definitely not cheap but for me worth it. I’m hoping spending the extra $$ on quality LEDs will pay off long term and they will last a long time.

Thanks Tenscourts and everyone else in this thread for all the tips and info!

Thought the harness connectors were under the car. What was shard about it?