3/5 kit installed on 06 denali

[Mocity]

Hello All,

I installed a Mcgaughy 3/5 kit yesterday. I am having an issue with the rear passenger side 1/2 inch higher than driver side. any ways to fix this? I also have the keys cranked up all the way and the front its still slammed. its rubs on the liners pretty bad, im running at 305/35/24. any suggestions would be great. Thanks for the help

 

[JustJake]

I've read people heat and reshape the fender liners with a heat gun, looks great tho!

 

[Knobz]

I've read people heat and reshape the fender liners with a heat gun, looks great tho!

Make sure that your panhard bar bracket on the passenger side isn't hitting the sway bar cuz that will hold you up and cause problems.

 

[Alex33]

Truck looks great OP.

 

[Mocity]

Thanks, I checked the sway bar and panhard, not touching. I reinstalled the factory keys, rides better less rubbing in front. The back right is still 1/2 higher than driver ride. does an adjustable Panhard bar help? Thanks for the previous suggestions.

 

[Knobz]

Thanks, I checked the sway bar and panhard, not touching. I reinstalled the factory keys, rides better less rubbing in front. The back right is still 1/2 higher than driver ride. does an adjustable Panhard bar help? Thanks for the previous suggestions.

A adjustable panhard bar allows you to center your axle side 2 side cuz the body goes over to one side more than the other when lowering. If you haven't, I would take out the rubber coil bushing things. They're like a 1/4" rubber donut looking things, taking those out will get you a lil lower in the rear.
About being a 1/2" higher on one side, it's hard to get every corner exactly the same. Mines the same way. A little higher on one side.

 

[OHSIXX]

Thanks, I checked the sway bar and panhard, not touching. I reinstalled the factory keys, rides better less rubbing in front. The back right is still 1/2 higher than driver ride. does an adjustable Panhard bar help? Thanks for the previous suggestions.

How much gas do you have in the tank? There is going to be more weight on the driver's side vs. the passenger which could explain your differences.....


SWEET Denali BTW !!

 

[krt]

looks nice!!

 

[Pachanga02]

Truck looks great.

 

[carcrz]

mine did the same was higher on pass. side to fix the problem i cut one loop off the spring