edgaranah1
Full Access Member
Nice is that your NNBS in the back?
Sent from my iPhone 4g using Tapatalk
Sent from my iPhone 4g using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
my 2/4 drop rides very close to stock. My wheels make the ride rougher then the drop. With the spindle drop up front and coils in the back it doesnt ride that bad.
did you crank down on your stock keys? Thats what I will be doing after the winter to get about a 3 inch drop in the front and possibly change out the springs in the rear to go a little lower all around. Im pretty certain when i adjust the keys to go lower the ride will roughen up. My drop rubs with the 305/35/24's too, in random places but not to bad. Rubs when its just me in the truck or its loaded up with people or towing. I would like to take my wheels off and warm up the fender liners and try and mold them a little. I am not going to swap tires and waste cash because it rubs a little. Your truck looks soo badass and has convinced me to debadge the sides of the truck.
-Gary
Nice is that your NNBS in the back?
Sent from my iPhone 4g using Tapatalk
what was your stock setup? I have a denali with autoride and i like the comfort
Mine does great in the snow though the front bumper does act as a snowplow most of the time.
Hello All,
I installed a Mcgaughy 3/5 kit yesterday. I am having an issue with the rear passenger side 1/2 inch higher than driver side. any ways to fix this? I also have the keys cranked up all the way and the front its still slammed. its rubs on the liners pretty bad, im running at 305/35/24. any suggestions would be great. Thanks for the help