3" Level lift w/ 33x12.5r20 or 285/55r20?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jbird

Full Access Member
Joined
Sep 29, 2010
Posts
143
Reaction score
10
615e069a5b65a4ae72811cd960aa718a.jpg

3" front level. 33x12.50x20 no rub


Sent from my iPhone using Tapatalk
 

02Burgundybeast

Full Access Member
Joined
Aug 9, 2015
Posts
356
Reaction score
124
Location
South GA
Check out my threads. I have run both the 33x12.50 toyo MTs and the 285s. Granted they were on 22s but they are the same size tire. The 33s didn't scrub a bit with a 2.25" ready lift, no lift in the rear. I later found a set of 285 Terra grapps and like them even more. I am currently running them on my new truck as well.
 

02Burgundybeast

Full Access Member
Joined
Aug 9, 2015
Posts
356
Reaction score
124
Location
South GA
@02Burgundybeast- Is there a reason you prefer the 285's over the 33's? Could you tell the 1/2" difference by looking at the tire?
The 285s look taller and ride considerably better. I did add wheel spacers to my current truck to widen the stance, but on my 07 Denali they looked perfect. The 33s were wider but I was looking for more sidewall and not so much on the width. MPGs were basically the same. I never tracked it but I could get ~300 miles to a tank.
 

Bigmac18

Full Access Member
Joined
Oct 27, 2014
Posts
168
Reaction score
119
3" level up front, 2" in rear, 305/55r20 with 2" wheel spacers on stock wheels
no rubbing (with lots of trimming)
I have the new upper control arms and Bilstein 5100s already, just need time to install and align.
full
 

Forum statistics

Threads
132,001
Posts
1,860,691
Members
96,400
Latest member
Njoppy
Top