3rd row won't come out

[Tim Quigley]

Okay, update. I got them out but the pushed the spring down and then came out. Not sure what else I should do with them now. Take all the screws out and clean it then grease again or

 

[PG01]

Honestly dont think that the front brackets were in all the way. Spray with a silcone lubricant while they are out and wipe dry before you put them in. You can spray a little bit of white lithium grease up in there where u see the factory grease. The white grease shouldn't drip but dont go crazy with it... on the spring part use the silicone but wipe before u put them back. Make sure the seatbelts are on the outside of the seat when you put them back in the truck. Don't grease the floor. Good luck. U cant manually move anything while they are out... its a pia

 

[Tim Quigley]

I greased everything I took off all the moldings with it and I still get stuck in the the Tahoe.

 

[Tim Quigley]

I greased everything I took off all the moldings with it and I still get stuck in the the Tahoe.

 

[Tim Quigley]

That spring push down to get them out. Have to do it on both sides

 

[PG01]

Hold on, something aint right..... gonna look now

 

[Tim Quigley]

honestly 3rd was the biggest mistake on buying a Tahoe. I'm happy with the caption seats and just saying I can only fit 4 people. Less aggravation

 

[PG01]

Ok, pull up on #1 so back of seat is down flat next lift up on #2 lever and raise seat about 6" then drop it down to about 2-3 above floor and pull on #3 handle and it should come right out... if not im sorry.... just did mine 9000 times

 

[Tim Quigley]

They still won't come out doing that

 

[Stairway2Kevin]

I'm resurrecting this, I have a similar problem. I can't get one of my 3rd row seats to release from the #2 latch to fold up so I can pull it out with the #3 handle. If that makes sense... Anybody have any suggestions on how I can get the #2 lever to release?