$79 bucks for an AFM disabler = drive better AND better gas mileage?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TahoeFL2017

Full Access Member
Joined
Sep 4, 2018
Posts
203
Reaction score
133
I went the cheaper route and got the AFM disabler on amazon (not a tune, just plug and play)

Wish I had done it sooner, truck stopped hunting for the right gears/RPM , and my highway mileage went up (?)

This mod plus using E85 has got me enjoying this truck all over again :)
 

89Suburban

Bull in the china shop
Supporting Member
Joined
Jan 10, 2013
Posts
14,946
Reaction score
41,220
Location
SE PA
I went the cheaper route and got the AFM disabler on amazon (not a tune, just plug and play)

Wish I had done it sooner, truck stopped hunting for the right gears/RPM , and my highway mileage went up (?)

This mod plus using E85 has got me enjoying this truck all over again :)
Good move buddy.
 

SpyShops212

Full Access Member
Joined
Jan 29, 2022
Posts
372
Reaction score
347
Doesn’t the tune do other things that the odb devices don’t? I would recommend changing the vlom with the updated one as well and maybe the lifters. At the very least the vlom.
 

Marky Dissod

Full Access Member
Joined
Mar 3, 2023
Posts
1,828
Reaction score
2,496
Location
(718)-
Permanent V4 disablement is one of the very many things that may (or may not) be included in a proper ecm tune.
(I say 'may not' because years ago, instead of disabling V4 mode, I went the other way and
INCREASED the V4 mode duty cycle on a 2012 Yukon XL. IT WAS A BIG MISTAKE.)
If more people better understood what an ecm tune can do, every single one of those people would've already gotten an ecm AND a tcm tune
(because they'd also better understand what a tcm tune can do).

Shutting off V4 mode:
gives V4 mode lifters much better odds of surviving much longer (for best results replace V4 mode lifters with V8 mode lifters and replace VLOM)
extends the life of the torque converter clutch, which tends to be the chief culprit behind most transmission rebuilds.
 

captras

TYF Newbie
Joined
Feb 3, 2011
Posts
13
Reaction score
37
Location
Sugar Land, TX
I have done alot of research on the AFM disablers. They do work, but not the way they lead you to believe. They actually do not disable the AFM. What they do is prevent the transmission from going into the highest gear, which is the only gear that the AFM can be activated in. You can do this on your own by simply putting your shifter in M5 (for 6 speed) or M7 (for 8 speed). This is what a tech from Range Technology told me when I asked what the device actually did.
 

RST Dana

Supporting Member
Joined
Jan 15, 2018
Posts
1,581
Reaction score
1,364
Location
OH
I have done alot of research on the AFM disablers. They do work, but not the way they lead you to believe. They actually do not disable the AFM. What they do is prevent the transmission from going into the highest gear, which is the only gear that the AFM can be activated in. You can do this on your own by simply putting your shifter in M5 (for 6 speed) or M7 (for 8 speed). This is what a tech from Range Technology told me when I asked what the device actually did.
I don’t have one, and I’m not from Missouri, but somebody would have to show me before I’d believe it prevents the transmission from going into high gear.
 

petethepug

Michael
Joined
May 4, 2016
Posts
2,962
Reaction score
3,196
Location
SoCal
Someone with a AutoSync module could confirm that the trans never goes into the last gear as well as the overdrive. All they’d have to do is flip the display on the DIC to show what gear the truck is traveling in at highway speeds.
 

Rygrego

Full Access Member
Joined
Dec 15, 2020
Posts
123
Reaction score
132
Location
Mission Viejo, California
I have done alot of research on the AFM disablers. They do work, but not the way they lead you to believe. They actually do not disable the AFM. What they do is prevent the transmission from going into the highest gear, which is the only gear that the AFM can be activated in. You can do this on your own by simply putting your shifter in M5 (for 6 speed) or M7 (for 8 speed). This is what a tech from Range Technology told me when I asked what the device actually did.
Totally not true. I've had a Range disabler for 3 years and my truck is using all 6 gears. On cruise I can average around 23-24 MPG with no V4.
 

MrMonte

Full Access Member
Joined
Jun 23, 2022
Posts
203
Reaction score
505
I tuned out AFM 30K miles ago and my Avg mpg went from 20.1 to 20.3. Pure hwy is mid 20s with a 6.2L/10 speed.
 

Ibustbravo

Member
Joined
Oct 13, 2022
Posts
97
Reaction score
128
Location
Centennial, Co
As soon as I have enough time here on the forum to post, I'm selling my range device. looks brand new.

My engine still blew up. I think in stock form theses engines have a 'grenade timer' and it can't be reset until you pull the AFM kit out of the engine.
 

Forum statistics

Threads
132,069
Posts
1,861,877
Members
96,534
Latest member
jack004

Latest posts

Top