93BlkOnGreenPro's 2007 Yukon SLT Build Thread

[93blkongreenpro]

My ds exhaust hanger has been broken for a while, so I attempted to atleast make it look better.

Then I realized that where the hanger ripped off, it also left a huge hole. So I will try to patch the hole with something off amazon, I'm sure.

It looks better, nonetheless.

Also, replaced the oil cooler bypass gasket. Hopefully, no more oil leaks.

Sent from my SM-N950U using Tapatalk

 

[Rocket Man]

My ds exhaust hanger has been broken for a while, so I attempted to atleast make it look better.

Then I realized that where the hanger ripped off, it also left a huge hole. So I will try to patch the hole with something off amazon, I'm sure.

It looks better, nonetheless.

Also, replaced the oil cooler bypass gasket. Hopefully, no more oil leaks.

Sent from my SM-N950U using Tapatalk

Hope that leak’s fixed bud.

 

[93blkongreenpro]

Hope that leak’s fixed bud.

I replaced the oil cooler bypass gasket and it stopped until I drove in the snow and did some donuts. Inguess the high rpms didnt help and its wet again, but not dripping like it was in the pic above. I'll have to get back under there, wipe and see if it's coming from the same area.

I installed the amazon $10 band clamp over the exhaust hole and all seems fine and it looks decent from underneath.

I think my truck warranty is expiring then end of the month so I will start to do my own maintenance and oil changes. I need to do the front diff, xfer case and rear diff fluids, tranny fluid and I think its time for an oil change as well.

I also need to adjust the ds exhaust tip bc its sticking out too far. And clean the interior bc it is nasty, atleast by my standards. I need to wash her and put the car cover on to keep the daily grime off. Poor truck sits 30 days at a time seems. Only put 10k on her last year.

Got the mazda 6 in April and I've put 30k on her, smh. 150 mile round trip to work.



Sent from my SM-N950U using Tapatalk

 

[93blkongreenpro]

Havnt done anything. She has been spending most of her time sitting in the driveway except when I need the room, which is about once a month.

I need to clean her up really good one of these days and cover her back up. That 2007 paint is holding up very well so far. The front bumper needs to be resprayed, but I'm sure the PO had hit something and had it poorly painted.

Sent from my SM-N950U using Tapatalk

 

[Rocket Man]

Sure does look good though.

 

[09Tahoe4Now]

@93blkongreenpro She definitely looks good with her stance sitting in the driveway. Are those 24”s she’s wearing? Size wheels? Ride quality? Nice amplifiers installation as well.

 

[93blkongreenpro]

Sure does look good though.

She take pics very well, lol. And the color is very forgiving!

@93blkongreenpro She definitely looks good with her stance sitting in the driveway. Are those 24”s she’s wearing? Size wheels? Ride quality? Nice amplifiers installation as well.

Thanks! She is lowered 2" in the rear so she actually sits level, but the driveway is at a downward slant. But yes, 24's, 305's. She rides like OEM. I have airlift helper bags for when I tow or when I carry 150 landscaping blocks or 50 80lb bags of concrete, lol. But she is the road trip vehicle other than the flowmaster thunder drone in town, it's a pretty tame truck..

Sent from my SM-N950U using Tapatalk

 

[93blkongreenpro]

Bertha still kicking. Only drove her about 5k miles last year. Used her earlier this year for a family vacay to the beach and that’s about it. Taking some BMW style 95’s to VA tmrw to get redrilled to 5x114.3 for my Mazda 6. She needs to be cleaned badly. Spider webs and stuff everywhere. And the Flowmaster Thunder rusted and broke right behind the axle, so hopefully I should have that “repaired” Wednesday.

Sent from my iPhone using Tapatalk

 

[93blkongreenpro]

Got the exhaust reunited, hung, secondary safety safety deleted, sore tire reinstalled and back in business. I have a small leak at the joint so I will get some exhaust sealant and redo the joint. Other than that, the cat back will prob get replaced next year.

Sent from my iPhone using Tapatalk

 

[PG01]

Got the exhaust reunited, hung, secondary safety safety deleted, sore tire reinstalled and back in business. I have a small leak at the joint so I will get some exhaust sealant and redo the joint. Other than that, the cat back will prob get replaced next year.

Sent from my iPhone using Tapatalk

I guess I should do my spare. I keep saying it to myself but.... ya know