noJeepshere
Full Access Member
I'm keeping an eye on this! I'd like to one day turn mu Yukon into an expedition/bugout rig, with many of the same mods you're doing.
'99 Tahoe - Expedition Build!
- Thread starter sparg93
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I can't really think of anything light enough that would be worth shipping....
Except of course for a near mint condition Denali console with all the buttons, cd player, sub and amp
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
You and I have the exact same rig, if you ever have any questions about the wonderful nuances, just ask - as an example, the nut on the bolt that holds the break pedal in is welded!!
Except of course for a near mint condition Denali console with all the buttons, cd player, sub and amp
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
You and I have the exact same rig, if you ever have any questions about the wonderful nuances, just ask - as an example, the nut on the bolt that holds the break pedal in is welded!!
AtomicHoe094
Atomichoe094
howmiuch??
Atomic - you got PM.
Some more photos for everyone!
Finished prepping and POR'ing the 14bsf - now I'm waiting for my Wagner severe duty shoes and I'll rebuild the drums and bend up some new brake lines.
before
after
Replaced the Compressor, drier and orifice tube...
After installing the new system, evacuating and filling with refrigerant...the high pressure relief valve went south...and I had to do it all over again!
I also installed a new idler pulley today and fixed my hi beam HIDs!
Some more photos for everyone!
Finished prepping and POR'ing the 14bsf - now I'm waiting for my Wagner severe duty shoes and I'll rebuild the drums and bend up some new brake lines.
before
after
Replaced the Compressor, drier and orifice tube...
After installing the new system, evacuating and filling with refrigerant...the high pressure relief valve went south...and I had to do it all over again!
I also installed a new idler pulley today and fixed my hi beam HIDs!
AtomicHoe094
Atomichoe094
nice work, are you also preparing for the world to end? haha
haha - you're not the first person to ask me that after seeing all this workl!
The trailer weighs around 2500 when fully loaded.
Monstar_est87
Full Access Member
Very nice... Im gonna have 2 do this 2 my LIMITED ... MADMAX edition...
Yes I did...but from a cost perspective, I've decided to keep it as-is. i will have a bumper + tire carrier on the Tahoe that is carrying an extra spare rim/tire for the truck.
The trailer is also going to be modified to carry an extra tire/rim.
Go for it - and keep it lowered!
