A/C repair

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Diller

Full Access Member
Joined
Sep 21, 2010
Posts
108
Reaction score
0
Location
Cedarburg, WI
Yep this is a rip off...they want to charge me 700 for the compressor and 100 for the receiver dryer and 200 to install them then they want to charge 120 to evacuate and recharge the a/c...does anyone know if there's a how to thread on replacing these parts?

RETAIL on a new OEM compressor is only $529.56.....so that alone, I would say is a ripoff, if they're going to charge you $700 for just the compressor.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
Per Oak51's request:


Compressor

Remove or Disconnect


  1. Negative battery cable.
  2. Recover refrigerant.
  3. Drive belt.
  4. Refrigerant hose assembly from compressor. Cap or plug all open connections.
  5. Electrical connectors, as necessary.
  6. Bolts.
  7. Compressor from bracket.
  8. Drain and measure compressor oil.
Install or Connect


  1. Fill compressor with oil.
  2. Compressor to bracket.
  3. Compressor mounting bolts. Tighten Bolts to 50 Nm (37 lb ft) .
 
Last edited:

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
Accumulator

Remove or Disconnect


  1. Negative battery cable.
  2. Recover refrigerant.
  3. Electrical connectors, as necessary.
  4. Pressure cycling switch.
  5. Refrigerant hose from accumulator using J 38042.
  6. Accumulator from the evaporator using J 38042.
  7. O-ring seals from accumulator. Important Cap or plug all open connections.
  8. Accumulator bracket screw.
  9. Accumulator.
  10. Upper and lower accumulator insulators.
Install or Connect


  1. Upper and lower accumulator insulators.
  2. Accumulator.
  3. Accumulator bracket screw. Tighten screw to 6 Nm (53 lb in) .
  4. New O-ring seals.


  1. Accumulator to the evaporator.Tighten Accumulator to 41 Nm (30 lb ft) .
  2. Refrigerant hose to accumulator. Tighten Hose to 41 Nm (30 lb ft) .
  3. Pressure cycling switch.
  4. Electrical connectors, as necessary.
  5. Negative battery cable.
  6. Charge system.

    • Check system for leaks.
 
Last edited:

Yukon_

Full Access Member
Joined
Oct 4, 2010
Posts
121
Reaction score
25
Location
Missouri
There is a Universal filter that should be replaced too. If doing the a/c repair work, may as well do that.
 

Spawrtan

TYF Newbie
Joined
May 23, 2011
Posts
8
Reaction score
0
all good posts, but it is not good to vent this stuff into the atmosphere. Better to have a pro evacuate the system and store it.
 

blizz

Full Access Member
Joined
Nov 29, 2009
Posts
545
Reaction score
7
Location
San Antonio, TX
My AC is hosed as well and was thinking of taking it somewhere to do the whole thing but I'd rather get the parts I need and replace them and just take it somewhere to vacuum and recharge the system. If I wanted to replace everything, what parts do I need? Can someone give me a parts list?
 

Forum statistics

Threads
132,332
Posts
1,866,241
Members
96,957
Latest member
beka1283
Top