A little info on my tahoe...

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ridechevy09

Full Access Member
Joined
Feb 6, 2016
Posts
274
Reaction score
113
Location
South carolina
I figured I'd give a little insight on my build. I have a 2016 tahoe 5.3l of course. Still waiting on BB tune to come to Charlotte to get a little more power but for now engine is stock mostly. I'm running 4.56 gears...

Suspension is a 12" bulletproof suspension stage 4 lift with icon coilovers and resis. Uniball upper control arms 4 link rear. Fox 2.5 rear shocks with resis. Complete powder is cash mere copper. But as of now the everything besides the drive train is being powdered rose gold axles, driveshaft complete IFS etc. This is probably the best riding lift I've ever owned. I even did away with auto ride. So the fox shocks 2.5s could be equipped. I had to trick the truck by removing the relay so it wouldn't throw a light. But it was worth it.

Wheels are made by specialty forged and they are 26x16 sf007s with billet caps
Powdered in illusive rose gold with a logo recut. Tires are 37.13.50 comforser cf3000 mud terrain. Smooth riding tire I'll prob by another set when these are bald.

Audio is a complete jl Audio setup. 2 jl audio w3 10s in the rear and replaced all door speakers with jl audio brand speakers. Out side the vehicle it has a wet sounds stealth 10 ultra hd sound bar that you can hear from a half mile away!! Best sound bar on the market and a REAL attention getter at shows!

Lighting isn't much. But it has 36 rigid industries rock lights to light up the suspension.

Plans are to have a complete 12- 15" air lift suspension before sema 2018.

That's pretty much it on this one.
I don't have any good suspension photo since I got a new phone. I'll be sure to post some. Or you can go on my Instagram and check it out @drew_darnell09cd2d5a2d38b9582b07a1dde01dc4e0fd.jpgc2c105fce5bfc4e988344425064525fe.jpg93835e25b0833791e75cbc7587c368a2.jpg25109c130f3475b4c8cbd81f1312ba30.jpg9c272d7d67c09cf379b610ddc1e2a53e.jpg

Sent from my SM-G935P using Tapatalk
 

AZCreeker

Full Access Member
Joined
Feb 16, 2017
Posts
382
Reaction score
252
Is it legal to drive as is? or do you need mudflaps that cover the rear?
Also do you have some sort of front bumper camera to help when maneuvering around tight places?
 
OP
OP
Ridechevy09

Ridechevy09

Full Access Member
Joined
Feb 6, 2016
Posts
274
Reaction score
113
Location
South carolina
Is it legal to drive as is? or do you need mudflaps that cover the rear?
Also do you have some sort of front bumper camera to help when maneuvering around tight places?
No mud flaps required in sc. I avoid tight spots because of height and how wide it is. A front camera would be sweet! May have to do that

Sent from my SM-G935P using Tapatalk
 

01Konvict

Boats n Hoes
Joined
Jan 16, 2011
Posts
2,740
Reaction score
691
Location
Raleigh/SML
Always looking good! I bet some fxr projectors will help light up the road. Maybe rose gold all the front chrome trim accent parts including headlight trim. That would look pretty dope.

Do get any driveline vibrations on that lift? Any U joint angle measurements you can share?
 

Forum statistics

Threads
132,461
Posts
1,868,602
Members
97,163
Latest member
DanScrantonCaddy
Top