Active brake stainless braided kit

[ATIII]

Right on!

 

[TheAutumnWind]

Russell lines 656040
Adapters 641331
I used cooper rear lines with 3/8 x24 ends that fit directly into Russell caliper lines which came in the kit to replace factory rubber hose. 3/8 x 24 is what -3 an hose is threaded to.

Sent from my SM-G900V using Tapatalk

thanks for the response on this. I've gotta get around to this install one of these days.

 

[Duramax05blk]

No Problem. Glad to help I would try to contact Russell first to see if they have a kit.

Sent from my SM-G900V using Tapatalk

 

[abishoff]

I ordered these adapters off of amazon and the factory hard lines off the axle didn't thread into the adapters. This is on my 06 Denali.

 

[Duramax05blk]

The adapters should to adapt factory hard lines from abs module to the new -3 stainless lines. Axle line should be a -3 thread already

Sent from my SM-G900V using Tapatalk

 

[abishoff]

So I only need 2adpaters at the top of the line? And the factory hardline should thread into 1 end of the stainless steal line? I assumed I need 4 adapters, 1 for each end of the line.

 

[Duramax05blk]

Correct should only need them on the top

Sent from my SM-G900V using Tapatalk