Adding a TruCool 40k on my Hoe with no factory cooler

[RaiderRodney]

Hey all, had an accident while on vacation a few years ago causing some front-end damage. Been working on it a few weeks and since I have everything took apart figured I'd add a TruCool.

I did go ahead and get the AN hardware that Doubeleive suggested. At least the adapters, I got a hose kit to make my own lines since they will be a little longer since I don't have a factory external cooler.

My question is which line going into the radiator is the exit? I've seen both answers multiple times online so I came here to ask the peeps I trust. I THINK the hot is going in at the bottom and the cooled is coming out the top? So, I'm just planning on tapping in at the top and then running to the cooler. Thoughts or suggestions?

 

[Joseph Garcia]

Good question.... @Doubeleive

 

[Doubeleive]

hot goes in the bottom, cooled comes out the top
and that company that makes the an lines makes them all different sizes and is good price those lines are made to hold 700psi far beyond the 20 psi needed

 

[RaiderRodney]

hot goes in the bottom, cooled comes out the top
and that company that makes the an lines makes them all different sizes and is good price those lines are made to hold 700psi far beyond the 20 psi needed

Thanks, that's what I needed and I knew you would know! Yeah those lines look great but I've been wanting to try my hand at making some myself. We'll see how it goes.