Aftermarket Radiator and E-fans
- Thread starter 408stkrtahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
408stkrtahoe
TYF Newbie
- Joined
- May 28, 2012
- Posts
- 26
- Reaction score
- 0
Heres a little sneak peek for all of you who are still a little unsure. These are 26,000lb coolers and the upper one is for tranny and the lower is for oil. They work great on cars with stalls and trans brakes.
With the grille on they are not to noticeable, they are from a distance though.
Here is the E-fans and shots of the radiator itself.
Enjoy.
---------- Post added at 05:35 PM ---------- Previous post was at 05:34 PM ----------
Currently its 85ish here and I can sit in traffic and see maybe 190-195. 210 does not exist anymore for me. I will be finding more info out tomorrow as to what else I can say (to not get in trouble with the bosses) and will let you know.
With the grille on they are not to noticeable, they are from a distance though.
Here is the E-fans and shots of the radiator itself.
Enjoy.
---------- Post added at 05:35 PM ---------- Previous post was at 05:34 PM ----------
Currently its 85ish here and I can sit in traffic and see maybe 190-195. 210 does not exist anymore for me. I will be finding more info out tomorrow as to what else I can say (to not get in trouble with the bosses) and will let you know.
OP
OP
408stkrtahoe
TYF Newbie
- Joined
- May 28, 2012
- Posts
- 26
- Reaction score
- 0
No Worries. I will be keeping those of you informed who are interested, and keep answering questions.
SC88
Full Access Member
Ok so just so I read right the trans cooler is not in the radiator? and it would have to be external like shown in one of your pictures? If so is it included in the purchase or would it be a "Extra"??
Also do you have more pictures of controller? is it adjustable as far as fan on and off temps? I don't really like it sitting in the picture you posted so first thing I would do is look to relocate it but thats just me.
Also do you have more pictures of controller? is it adjustable as far as fan on and off temps? I don't really like it sitting in the picture you posted so first thing I would do is look to relocate it but thats just me.
OP
OP
408stkrtahoe
TYF Newbie
- Joined
- May 28, 2012
- Posts
- 26
- Reaction score
- 0
That is correct, the trans cooler is not in the radiator. And yes it would need to be external and it would have to be sold with the radiator, its hard to say as to what kind of package it would be offered in since we are not to that point yet at work. But to my best guess it would be
1. E-fans and controller
2. Rad, E-fans, trans cooler
3. Rad, E-fans, trans cooler, oil cooler (for those that didn't come with like mine)
4. Or if you have a trans cooler already then the rad and E-fans
I cant give to many pics of the controller as it has our logo on it and will give it away real quick. But the controller is adjustable from 160-210 deg and it has a little flat blade dial hidden in it and you can mount it anywhere you want (given the amount of wire you want to run), it also kicks the fans on at 60% first and then 100% if needed and you will have to dial that in yourself there is no "preset" turns. Ive gone through about 4 tranny cooler setups and ive pulled my fans a couple times and that was the best solution at the time for me.
SC88
Full Access Member
Well it sounds like a good setup if the price is right. The fact that your responding quick to questions and post could be a good thing IF people run into issues good CS & tech help goes a long way.
When is this expected to be released to the public?
When is this expected to be released to the public?
OP
OP
408stkrtahoe
TYF Newbie
- Joined
- May 28, 2012
- Posts
- 26
- Reaction score
- 0
That's kind of the reason I put it up here is because it made a ton of difference for me and I would not be the only one who would want one, I just got lucky enough to be able to create it, my friend and I did it in 8 total days from start to finish. And I agree with you 100% on service it can make or break a deal. As far as production goes Ive had this done for a couple of months and still nothing but I will be asking when tomorrow since there seems to be a lot of interest here, and we've had calls asking about this particular setup. I'm hoping soon (a few months at most) it will be set into production.
Interested as well. As with most things, it will come down to price vs quality as well as ease of installation. Looking forward to hearing more.
OP
OP
408stkrtahoe
TYF Newbie
- Joined
- May 28, 2012
- Posts
- 26
- Reaction score
- 0
Price is something I've heard a lot of, and will let you all know when I know. As far as installation goes, I designed it to where you take out the radiator and drop this one in and bolt it to factory location. The cooler would come with a bracket and the only part would be to cut the factory cooler lines and attach new hoses to it is the only creative part you guys would have to do,
