Air/ Autoride

[fishingwizard]

So I did a 2" spacer lift kit front and rear on the burb and I need to adjust the rear airride sensors to make the shocks level when towing, as she sags 2-3" when hooked up to the boat because the sensor won't trip the compressor. I have read somewhere that there could be some aftermarket brackets for the sensors to raise them OR I have look at welding a 2" extension in the sensor arm by a buddy of mine.
What have y'all done to remedy this?

Thanks.

 

[01Konvict]

Look at this thread for options and how to fix the links. Best way for you is to call Full Throttle Suspension and order the ride height rod extenders.
http://www.tahoeyukonforum.com/threads/how-to-setup-auto-ride-for-lifts.75232/

 

[01Konvict]

@fishingwizard Post pics and info on your shock extender made for the air ride

 

[fishingwizard]

Thanks for the info and I will be ordering those longer sensor arms asap! I just used the Suncore spacer lift 2" that bolts on top of the coil over on the front and a 2" spacer that sits under rear coil spring. I used the 2" spacers on all four corners but I also went up two sizes on tires to 33s so the truck actually sits prob 3-4" taller than stock. I will grab some pictures tomorrow. I had to replace all of my shocks and used the Arnott shocks and compressor they were easy to install and also 1/4 of what the Chevy wanted to replace them.