SunlitComet
OBS Jedi-Do Good
Think about tweak the box to help it too. or find thinner rubber isolator mounts so it is closer to the wheel well and farther form the roof. Hood hinge bumps it to when moving the hood.
Air Intake Upgrades
- Thread starter 98 2-DOOR
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1999 Z56 PPV
TYF Newbie
my truck came with the throttle body spacer and the top of the K&N cold air does touch the hood when closed, 
but it's not much. I want to put a cowl induction hood on eventually anyway.
but it's not much. I want to put a cowl induction hood on eventually anyway.
skyhighsami
Full Access Member
- Joined
- Mar 2, 2010
- Posts
- 403
- Reaction score
- 39
For the new body style trucks Air Raid makes a molded intake tube. The belief is the air box on the trucks from the factory are very good and a replacement is not needed. So for $100 or so you get the MIT tube and retain your stock ditching the factory intake tube and resonators. Is there a similar option for the GMT400?
