crazyikon86
Full Access Member
- Joined
- Aug 9, 2012
- Posts
- 120
- Reaction score
- 2
extension swivel extension
any tips on changin the #8 spark plug???
- Thread starter 07lt
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Any update on if the tool you purchased from Amazon did the trick?
Danzigman
Full Access Member
So it was worth the $60?I need to change mine.
Hello Everyone, New here.
Just wanted to add to Monolith092068's post..
First of all I didn't feel like yanking the wheel and inner well so my stubborn self had to try my own way... (FAIL,OUCH,My arms hurt now from the cuts)
So I Saw Monoliths Post and taped a 3/4 short to my 5/8 SPARK plug socket.. (Perfect length) ..
Now here's my two cents..
If you have meat hooks with five sausages for hands then this may still be too tight... So just pop the bolt for the dipstick and slide it out, and that will increase the room enough to get your meat hooks in there...
Great idea, thank you. Just wanted to add to it... Now next time maybe I'll come here first.. Haha
Sorry I see post is old but maybe someone will benefit..
Edit.. Thanks to my wonderful organizational skills couldn't find my swivels... So I was limited in positioning also..
Just wanted to add to Monolith092068's post..
First of all I didn't feel like yanking the wheel and inner well so my stubborn self had to try my own way... (FAIL,OUCH,My arms hurt now from the cuts)
So I Saw Monoliths Post and taped a 3/4 short to my 5/8 SPARK plug socket.. (Perfect length) ..
Now here's my two cents..
If you have meat hooks with five sausages for hands then this may still be too tight... So just pop the bolt for the dipstick and slide it out, and that will increase the room enough to get your meat hooks in there...
Great idea, thank you. Just wanted to add to it... Now next time maybe I'll come here first.. Haha
Sorry I see post is old but maybe someone will benefit..
Edit.. Thanks to my wonderful organizational skills couldn't find my swivels... So I was limited in positioning also..
Last edited:
iLikeEggs
Potato!
Got it from the top on my 2011.
#1taho
5150TAHO
Take that heat shield off and that little bit of room helps a lot. 3- 10 mm nuts and it's off.
JML07denali
Full Access Member
- Joined
- Mar 23, 2014
- Posts
- 871
- Reaction score
- 360
I went in the right wheel well. Took down the fender liner and it took me less than 5 minutes to change it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
millerladam
TYF Newbie
- Joined
- Jun 6, 2016
- Posts
- 25
- Reaction score
- 4
Do the first seven and plug wires at home then go to best friends house for BBQ and birthday party and ask him to do #8 since he is better at it and doesn't have "girly" hands like you do.
Note: I am a software developer and systems engineer which is why I have "girly" hands. It still took my friend about 45 minutes to do them and the only reason I did not try it myself was because I saw how much of a pain it would be and we were already late for the birthday party.
Note: I am a software developer and systems engineer which is why I have "girly" hands. It still took my friend about 45 minutes to do them and the only reason I did not try it myself was because I saw how much of a pain it would be and we were already late for the birthday party.
Similar threads
