Anyone tried GTR Ultra 2 LEDs in 2015+ Tahoe/Suburban?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

sspearsau

Member
Joined
Mar 12, 2020
Posts
43
Reaction score
24
The car has not even been started since installing them. I think my wife put about 5 miles on her car during the month of April. The month of May should be different. Governor announced some lightened restrictions.
 

Emedeiros96

TYF Newbie
Joined
May 19, 2020
Posts
1
Reaction score
0
I just got the GTR Ultra2 LEDs for my 2015 Tahoe. Installed them last night but having trouble. They will stay on for a few minutes but then shut off. Turning off the headlights manually then back on would not make them come back on. No errors reported on the dash. It started to rain so I didn't do any additional troubleshooting. I emailed GTR customer service and waiting for a reply. Thinking this is a load issue but the Ultra2 bulbs were not supposed to need resistors.
I just got the GTR Ultra2 LEDs for my 2015 Tahoe. Installed them last night but having trouble. They will stay on for a few minutes but then shut off. Turning off the headlights manually then back on would not make them come back on. No errors reported on the dash. It started to rain so I didn't do any additional troubleshooting. I emailed GTR customer service and waiting for a reply. Thinking this is a load issue but the Ultra2 bulbs were not supposed to need resistors.
I have the same issue I just installed mine today. They turn on right away, then are on for a couple minutes, then just shut off. The only difference is with mine if I turn them off then on and repeat a few times they’ll come on and stay on until I turn the car off and repeat the process. I was just wondering if you got a response from GTR yet? I read some reviews and apparently they take a while to get back to you if you have an issue with their products
 

dsh1106

Member
Joined
Feb 16, 2020
Posts
41
Reaction score
18
Location
39.7594° N, 84.1917° W
Does anyone have the dimensions in these bulbs? Specifically from the locking shoulder to the back of the heat sink.

I've seen so many different variations in OEM components, I want to measure for fitment before I spend $$$

Scott
 

Eidens13

Member
Joined
Jan 3, 2012
Posts
90
Reaction score
9
Location
New York, NY
@sspearsau i installed the lights today and the output is great. Nice upgrade but did you bulbs have any wiggle to them after you twisted them into the socket?
 

sspearsau

Member
Joined
Mar 12, 2020
Posts
43
Reaction score
24
@sspearsau i installed the lights today and the output is great. Nice upgrade but did you bulbs have any wiggle to them after you twisted them into the socket?
Yes, I did notice they were not fully snug in there. I have not noticed any negative ancillary impacts with this being the case. All good so far.
 

Eidens13

Member
Joined
Jan 3, 2012
Posts
90
Reaction score
9
Location
New York, NY
Installed today along with the Gen 5 diy fog light kit. Looks great. The fog light kit is really easy to do.
 

Tiki

Full Access Member
Joined
Jun 4, 2013
Posts
640
Reaction score
321
Output pictures (down road)?
 

Forum statistics

Threads
132,369
Posts
1,866,888
Members
96,996
Latest member
Brynedic

Latest posts

Top