Arnott conversion bypass install

[rollinjoy]

I installed the Arnott Autoride conversion kit on a 2002 Yukon Denali xl. Now I can’t find where to wire the bypass module for the kit. Where is the air suspension controller located? Instructions say it’s in rear right side of cargo area. I can’t find

 

[GreyStone]

I installed the Arnott Autoride conversion kit on a 2002 Yukon Denali xl. Now I can’t find where to wire the bypass module for the kit. Where is the air suspension controller located? Instructions say it’s in
Go ro 6.50

 

[rollinjoy]

I watched that video already. That seems to be on a newer model. Mine is 2002 Denali xl

 

[Rocket Man]

The controller is behind the right rear panel in the cargo area. You have to pull that big panel that covers the rear hvac unit under the window. There’s a computer that controls the air suspension with 3 plugs in it I believe.

 

[rollinjoy]

That’s exactly wat the instruction says. But I can’t find it. Is it the side where the jack is or passenger side? I looked on driver side. May be I’ll pull both sides out. Thanks

 

[Rocket Man]

That’s exactly wat the instruction says. But I can’t find it. Is it the side where the jack is or passenger side? I looked on driver side. May be I’ll pull both sides out. Thanks

Ummm....the right side. As in passenger side. Driver side is the left side of your vehicle.

 

[rollinjoy]

Found the controller. Thx. Now does anyone know Which one is pin D and pin E on the gray connector. And pin B-8 on pink connector. Those are the 3 wires I need to splice into

 

[Rocket Man]

Here’s the grey connector. D is the orange wire, E is the black wire.

 

[Rocket Man]

Here’s the pink connector. B-8 is Dark Blue with a White Stripe.

 

[rollinjoy]

U da man rocket man. Thx