Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
couple of observations - what material are you using for exterior parts? Second... be stupid careful printing/selling the AT4 or GMC logos... you'll get a super nice cease and desist letter from GM...
Since I pointed you to this, do I get a discount?![]()
And here are the depth dimensions of the area:
Just under 2.75” toward the front, and just under 3.5” in the back.
Measured the thickness of my iPhone 13 Pro Max in its case. It’s about 1/2”, so legs on the “baby crib” probably should allow for 9/16 or 5/8” under the bed.
That guy puts out a lot of good contentI just watched this vid in case anyone is interested:
Looks pretty cool, but My view is the space under it should be at the bare min for a phone on the charger, and the "bin" should be as deep as possible, so one can store something in the tray, remove the tray to get to the phone, and not spill the tray contents. But, looks good...now to get one for the Denali sized bin....View attachment 371124
Might remove the "tray" aspect and just make it 1 piece that lifts out Also I may lower the "pocket" area slightly to give depth....we shall see.