Autoride
- Thread starter Rich C
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
MrBalll
Full Access Member
http://www.tahoeyukonforum.com/threads/autoride-conversion-kits.91011/
http://www.tahoeyukonforum.com/threads/autoride-conversion-to-standard-shocks.82168/
http://www.tahoeyukonforum.com/threads/03-denali-to-delete-air-ride-or-to-keep.58120/
http://www.tahoeyukonforum.com/threads/replacing-autoride-shcoks-with-std-shocks-which-ones.49886/
And there's still plenty of other topics.
http://www.tahoeyukonforum.com/threads/autoride-conversion-to-standard-shocks.82168/
http://www.tahoeyukonforum.com/threads/03-denali-to-delete-air-ride-or-to-keep.58120/
http://www.tahoeyukonforum.com/threads/replacing-autoride-shcoks-with-std-shocks-which-ones.49886/
And there's still plenty of other topics.
This is my thread and has some info on it.
http://www.tahoeyukonforum.com/threads/yukon-down-awd-delete-headers-converter-etc.81191/
Basically I had the electric shocks and rear load leveling. I used the ebay resistors and unplugged the autoride relay. Then I installed 4 normal bilstein 4600 shocks. I also lowered 2/3 but you dont have to do that. Then I measured for and order air lift helper bags ($100) for the rear. I run 5-10 psi daily, and 30-50 when towing depending on tongue weight. I would never go back to the stock setup, the truck rides so much better now and so fewer expensive things to give you problems.
http://www.tahoeyukonforum.com/threads/yukon-down-awd-delete-headers-converter-etc.81191/
Basically I had the electric shocks and rear load leveling. I used the ebay resistors and unplugged the autoride relay. Then I installed 4 normal bilstein 4600 shocks. I also lowered 2/3 but you dont have to do that. Then I measured for and order air lift helper bags ($100) for the rear. I run 5-10 psi daily, and 30-50 when towing depending on tongue weight. I would never go back to the stock setup, the truck rides so much better now and so fewer expensive things to give you problems.
Eli B
Member
I converted the fronts to Arnott's performance option, and just replaced the rear auto-leveling shocks and compressor with parts from eBay and was very surprised how well everything works. I've heard horror stories about repairing autoride but I'm very happy with my new setup which was a total cost of $450.
