B pillar black trim rattle

[GranPrix]

So I searched a bit and only found one thread that came close to my issue.

How many of you DO NOT experience buffetting and vibration problem?

I believe with all this potholes every where here in NJ,NY. Will be out of balance already. Good luck going back home. Sent from my Pixel 2 XL using Tapatalk I also had a vibration on my ‘16 Yukon xl with 20” wheels and Michelins that went away with road force balance. Dealer said two wheels...

www.tahoeyukonforum.com

I noticed the rubber trim between the glass and the plastic trim isn’t “sealing” correctly and it seems it comes up short letting in the wind at high speeds causing the rattle. Anyone else have this issue?

 

[Thrust]

Yes I had that issue. I solved it by applying 3M double sided foam tape, meant for auto applications, onto the interface between the door and the trim.

 

[GranPrix]

Yes I had that issue. I solved it by applying 3M double sided foam tape, meant for auto applications, onto the interface between the door and the trim.

How difficult is it to remove the trim?

 

[Oh Kee Pah]

These trim pieces are horrible!!!
+1 on the 3M auto tape. I've used that on 2 of my pillars and that has helped. New trim pieces are $40+ shipping...
Yes, you can remove. DON'T break the clip on the middle back of the trim piece, or it will be worse than when you started fiddling w/ it.

 

[Thrust]

Get yourself a set of plastic trim removal tools. Take your time and work around it with the tools.

 

[swathdiver]

3M #38583 or Speedokote SMT-97