bad front dif?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
So really weird. Going on a 2 hour trip it felt like a tire blew out. Pulled over and nothing. Couldn't find anything wrong. Drove off and it was fine. Coming back almost home it did it again. Feels kinda like a hopping binding thing. Guessing the dif is about to shit on me... any ideas other than dif?
 

alacran

Full Access Member
Joined
Sep 29, 2010
Posts
226
Reaction score
7
check the emergency brakes. mine became loose and would hit/grind the rotors once in a while
 
OP
OP
Gzes

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
E brake never has worked since I got it. And it's coming from front end. Not a grind it's an actual shaking like if a tire blew out
 

Kpwweb

Full Access Member
Joined
Dec 11, 2015
Posts
698
Reaction score
302
Silly question, but have you tried putting it in 2wd only to see if it continues?

Could also be a bad/dry u-joint or bad/dry cv joint...?

Does it happen just when making a turn or going straight also?
 
OP
OP
Gzes

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
It's awd. Can't turn to 2wd. Does it going straight. No problems turning. No sound on cv axles neither. Willing to bet bearings on the dif are shot since it's had a small dif whine since I got it
 

Rivieraracing

Full Access Member
Joined
May 2, 2009
Posts
3,810
Reaction score
82
Location
Oregon
Does the shaking change with speed and have you tried applying the brakes while in a straight line to rule out brakes causing the issue? Also, make sure you don't have any lugnuts loose
 
OP
OP
Gzes

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
Lugs are fine. Both times it happened were on highway going 75. It's at a shop atm but they havnt even started. Getting kind of pissed. Heard good things but if they don't start on it this week I'm pulling it out and doing myself. I've got the skills to do it but I'm doing a h22 swap on one of my hondas so have my plate full
 

wesyder

Member
Joined
Dec 21, 2009
Posts
46
Reaction score
9
Location
Eastvale
I had a problem similar to this and it was a front hub bearing


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
132,332
Posts
1,866,184
Members
96,952
Latest member
tdmcpa
Top