BAMF Pri's 2005 Chevrolet Tahoe build thread

[73impala]

Not much to report on change but ac in the truck has started to blow hot and the compressor is short cycling. Replaced the low pressure switch and ordered some gauges to add some freon to it.

Was raining but was walking past it so snagged a pic

2019-05-07_09-17-54 by James Pate, on Flickr

 

[Tonyrodz]

Not much to report on change but ac in the truck has started to blow hot and the compressor is short cycling. Replaced the low pressure switch and ordered some gauges to add some freon to it.

Was raining but was walking past it so snagged a pic

2019-05-07_09-17-54 by James Pate, on Flickr

Still looks clean.

 

[05Single]

Not much to report on change but ac in the truck has started to blow hot and the compressor is short cycling. Replaced the low pressure switch and ordered some gauges to add some freon to it.

Was raining but was walking past it so snagged a pic

2019-05-07_09-17-54 by James Pate, on Flickr

Found you on i.g. through another random post lol. Trucks looking good

 

[73impala]

Haha I saw that, thanks man!

Well just some fun useless info, found out the truck has 3.23s in it ew. So one day it'll get some gears.

 

[73impala]

Dirty.

LRM_EXPORT_612428023765719_20190906_181428057 by James Pate, on Flickr

LRM_EXPORT_612436213689258_20190906_181436246 by James Pate, on Flickr

 

[05Single]

Hurricane just missed ya ?

 

[Ryan Buck]

Dirty.

LRM_EXPORT_612428023765719_20190906_181428057 by James Pate, on Flickr

leLRM_EXPORT_612436213689258_20190906_181436246 by James Pate, on Flickr

have you had any problems with the pro comp lift? i just put a 6 inch on mine and i’m thinking of taking it back off. that upper control arm drop down set up is pure crap. i need a spindle style lift!

 

[73impala]

Hurricane just missed ya ?

Yeah it went just north of us.

have you had any problems with the pro comp lift? i just put a 6 inch on mine and i’m thinking of taking it back off. that upper control arm drop down set up is pure crap. i need a spindle style lift!

Only issue I had with the procomp lift is that I had is holding an alignment. I switched to a nylon locking nut on the alignment bolts and it seems to be holding. I went with procomp because my tahoe is 2wd and i wanted to also run a lift spindle in the future.

 

[05Single]

So are you gonna tell the guys or should I ?

 

[Sam Harris]

So are you gonna tell the guys or should I ?

..... [emoji897]