Bilstein shocks model #'s for 2" lift?

[owl_93]

I'm going to use keys/spacers and z71 coils in my Tahoe. I want to take out the autoride and replace the shocks with bilsteins. Looking online, I can find the right ones for my Tahoe, but I think I will need longer ones than the replacements since I'm lifting about 2"

I know quite a few of you have gone the bilstein route, do you know which shocks you purchased? thanks

 

[01TX_Tahoe]

I'm running the 5100s on all fours. Ride is good.

 

[owl_93]

I'm running the 5100s on all fours. Ride is good.

Do you know the part #s on your front and rears?

 

[01TX_Tahoe]

No I don't remember and I've had them for a while

 

[TheAutumnWind]

Do you know the part #s on your front and rears?

I will post some more pics soon as I get a chance to clean it up and take them. I put the 5100s on the F/R at the same time. You need parts # F4-BE5-C153-H0 (Front - Chevy) & F4-BE5-6682-H8 (Rear - Dodge). Take a look at this key & spacer link.

http://z71tahoe-suburban.com/iboard/index.php?showtopic=29488&hl=ford+keys

I came across this thread:
http://www.tahoeyukonforum.com/forum/showthread.php?t=24444&page=14

Those are old part numbers.

Should be: 24-186643 Bilstein &
24-185783 Bilstein

http://cart.bilsteinus.com/productsearch/F4-BE5-6682-H8
http://cart.bilsteinus.com/productsearch/f4-be5-c153-h0

The rears are a part number for a dodge truck shock, they are ~.6" longer collapsed and ~1.75" longer extended than the p/n for a the 5100's on a yukon, which only allows for 0-1" lift.

 

[bmeyer40]

Bilstein BE56647H1 rear 1.5" longer

---------- Post added at 03:38 PM ---------- Previous post was at 03:32 PM ----------

Ill have to look at my fronts

 

[tobysan90]

this is what i just order from evilbay for my suburban with my 2inch lift
fronts 24-186643
rears 24-185783

 

[owl_93]

this is what i just order from evilbay for my suburban with my 2inch lift
fronts 24-186643
rears 24-185783

I just bought a pair of the 83's on amazon. $75 each with free shipping. Going to have to wait for my next paycheck to get the other pair

 

[hoss08]

I came across this thread:
http://www.tahoeyukonforum.com/forum/showthread.php?t=24444&page=14

Those are old part numbers.

Should be: 24-186643 Bilstein &
24-185783 Bilstein

http://cart.bilsteinus.com/productsearch/F4-BE5-6682-H8
http://cart.bilsteinus.com/productsearch/f4-be5-c153-h0

The rears are a part number for a dodge truck shock, they are ~.6" longer collapsed and ~1.75" longer extended than the p/n for a the 5100's on a yukon, which only allows for 0-1" lift.

Those rears you have listed are also a GMC part number, for a Yukon with a 0-3" lift. Not that it matters much, it might make someone a little more comfortable knowing that though.

 

[TheAutumnWind]

Those rears you have listed are also a GMC part number, for a Yukon with a 0-3" lift. Not that it matters much, it might make someone a little more comfortable knowing that though.

Good to know. The bushings are the same, so that's not a problem.