What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

[Doubeleive]

Get OEM ones for the fronts and Duralast Gold for the rears. I tried the Duralast gold for the front but it made the ride stiff and they didn’t settle correct when I torqued to 18lbs. factory spec. I changed to oem and all was good. The rears I recommend Duralast gold which is more thicker and they have grease fittings too and lifetime warranty.


View attachment 444967

That's the point of adding the hellwig sways bars and good endlinks "to stiffen up the ride"

 

[SpyShops212]

That's the point of adding the hellwig sways bars and good endlinks "to stiffen up the ride"

I am talking about the front sway-bar end-links.

 

[Doubeleive]

I am talking about the front sway-bar end-links.

lol, yes we are on the same page here.
I might be crazy but I can feel the difference just sitting in the vehicle with hellwig sway bars installed

 

[the 18th letter]

if I have the BB AutoCal do I still need to invest in a scanner for my truck. 2015 Y-SLT, I’m an intermediate/moderate mechanic so for major stuff I’m probably not tackling it anyway.

 

[Walkerfever]

Pretty satisfied with how this whole project turned out. My son and I swapped in a brand new (kinda) 220a GM alternator. The regulator had a broken connector so I showed him how to remove the stock alternator's regulator and swap it over. After that, we designed a Megafuse mount, and wired it in. Everything came out pretty damned good, for less than $200. Only thing I have left to do is reprint the mount in TPU instead of PETG since I ran out.

 

[Doubeleive]

Pretty satisfied with how this whole project turned out. My son and I swapped in a brand new (kinda) 220a GM alternator. The regulator had a broken connector so I showed him how to remove the stock alternator's regulator and swap it over. After that, we designed a Megafuse mount, and wired it in. Everything came out pretty damned good, for less than $200. Only thing I have left to do is reprint the mount in TPU instead of PETG since I ran out.
View attachment 445502
View attachment 445503
View attachment 445504

as long the wire is rated for more than that fuse then you are good to go, if not then there is a risk of fire. that is the point of having a fuse rated at a lower rating than the wires. In case of a short circuit the fuse blows and prevents a fire.

 

[Walkerfever]

as long the wire is rated for more than that fuse then you are good to go, if not then there is a risk of fire. that is the point of having a fuse rated at a lower rating than the wires. In case of a short circuit the fuse blows and prevents a fire.

That is another reason I mounted the fuse where I did. I wanted it as close to the battery as I could.

 

[Hattie2879]

Finally had to replace the shark fin antenna. Did it myself though and saved a lot of money. Thanks YouTube!