Okay I will give you that. 
From my CB Radio.
From my CB Radio.
Blazed's 2011 Tahoe Build
- Thread starter Blazed
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Status
mjenk430
Full Access Member
Very catchy song....
I would have never thought about powdercoating weakening wheels. Peaked my curiosity, been looking around on the net for the last hour or so. Looks like there is no definite answer that I found, just opinions. Seems to make a difference whether they are forged or cast, but I guess the jury is still out.
On a side note, what psi do you guys run in your 24's?
I would have never thought about powdercoating weakening wheels. Peaked my curiosity, been looking around on the net for the last hour or so. Looks like there is no definite answer that I found, just opinions. Seems to make a difference whether they are forged or cast, but I guess the jury is still out.
On a side note, what psi do you guys run in your 24's?
Hmmm...... so it is not conclusive.
From my CB Radio.
From my CB Radio.
OP
OP
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Modded told me to run 38-40.
mjenk430
Full Access Member
Thanks for the info. My tpms reprogrammer should be here tomorrow so I can set my new tires. Do you know what the upper threshold is on psi before the light comes on?
OP
OP
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Not but I believe it can be reprogrammed to go off at different PSI
---------- Post added at 01:41 AM ---------- Previous post was at 01:40 AM ----------
But it isn't 40 cause or 44 because my moms esky has 44 in one of her tires and the light isn't on. I put them all at 40 no light.
---------- Post added at 01:41 AM ---------- Previous post was at 01:40 AM ----------
But it isn't 40 cause or 44 because my moms esky has 44 in one of her tires and the light isn't on. I put them all at 40 no light.
mjenk430
Full Access Member
Cool, thanks
Modded
That Guy
- Joined
- May 3, 2009
- Posts
- 6,942
- Reaction score
- 109
It's 48 PSI. I know because once my tires warm up, I normally hit that if I had filled them recently.
The Tech2 tool can change that to any range one desires though.
Come to think of Neo is on the money.
One time I had a nail in the tire with a slow leak...... I got tired of topping it off every day so I put like 50 PSI or so in it.....
From my CB Radio.
One time I had a nail in the tire with a slow leak...... I got tired of topping it off every day so I put like 50 PSI or so in it.....
From my CB Radio.
OP
OP
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Guys look at my new thread in street suspension please.
- Status
