Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

[05Single]

My buddy's truck . Showed him my hd grille . We were thinking might be able to shave his HD grille that he has laying in storage at an angle to fill that gap in the middle . Just to give you a visual. But I'm jelly , I've always wanted that bumper cover

 

[HiHoeSilver]

My buddy's truck . Showed him my hd grille . We were thinking might be able to shave his HD grille that he has laying in storage at an angle to fill that gap in the middle . Just to give you a visual. But I'm jelly , I've always wanted that bumper cover View attachment 202544

It's just denali, no?

 

[05Single]

It's just denali, no?

It's an oem Denali bumper cover , yes

 

[blurred]

I think I'll be happy with it. After seeing that.

Thought I'd be happy with the HD one though.

Anyway, swapped the bumpers and have the clean one installed. Clear coat on the cap isn't that shiny but whatever.

Now to work on the hood and bumpers as I find time.

Then, or maybe during, I'll be pulling the wheels, sanding out the curb rash and repainting gunmetal.

 

[blurred]

I was able to pull the bumpers off the shelf and put in a little work. Started pulling the bondo off the original HD bumper and made the initial cut on the Denali bumper.

I'm thinking this will look decent.

 

[HiHoeSilver]

I was able to pull the bumpers off the shelf and put in a little work. Started pulling the bondo off the original HD bumper and made the initial cut on the Denali bumper.

I'm thinking this will look decent.

View attachment 204681

Nice. I've got to get back on mine, too. The time just seems to vanish.

 

[blurred]

And then I took a photo of things

 

[Tonyrodz]

And then I took a photo of things

View attachment 204875

Beautiful shot.

 

[blurred]

Thank you #tonyrodz

Today I made some progress on the rear bumper since I ran out of cutoff discs for the grinder with working on the bracing for the front bumper..

Hoped that I could just reclear after a little sanding but it wound up requiring a little more work than anticipated.

 

[05Single]

Thank you #tonyrodz

Today I made some progress on the rear bumper since I ran out of cutoff discs for the grinder with working on the bracing for the front bumper..

Hoped that I could just reclear after a little sanding but it wound up requiring a little more work than anticipated.

View attachment 205066 View attachment 205067

Nice work . I used jbweld on a few gouges on my Denali cover and they've been holding up great. Wouldn't trust it to hold the cap and bumper cover together tho lol.