Tonyrodz
Resident Resident
What does torque management do? Does it basically help your trans survive behind the motor?
BYE 5.3, HELLO 6.0
- Thread starter liftedtahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
bottomline2000
Full Access Member
Yeah it pulls timing between shifts. Feels like the throttle is closing and opening back up..softens the shifts but my trans has a shift kit so it feels slow and it's not consistent.
Blackbear gives u a separate tune option with the tow haul mode button that gives u 0 torque management but it holds each gear longer..not good for casual driving around.
Sent from my SAMSUNG-SM-T377A using Tapatalk
OP
OP
liftedtahoe
Full Access Member
I didnt add the torque management to my tune i dont guess lol because it shifts pretty hard and quick, i did do the tow haul button but I honestly cant tell a difference when the tow haul is on
bottomline2000
Full Access Member
Yeah sounds like u don't have any tm enabled. I ran 0 TM before the motor swap and the shifts were just as you described. The only difference would be the trans holding each gear longer. Between the stall and the TM kicking in it sucks sometimes.
Sent from my SAMSUNG-SM-T377A using Tapatalk
OP
OP
liftedtahoe
Full Access Member
At first i could kinda tell a difference because it would downshift when id turn it on but now not so much lol
