Cam questons.

[felskee]

well since im getting new heads i want a good loope cam. but still daily drivable. what all mods would i have to make to the heads,or whatever.

heads....http://www.summitracing.com/parts/SUM-151124/

what cam would work?

 

[blueflamed03]

staying fuel injected?

 

[felskee]

yes sirrr

 

[blueflamed03]

get on Jegs or Summit, and start looking. Remmber, you'll need one compatibale for computer, so you'll need a tune as well.

 

[felskee]

well ill end up getting a bb tune. sooo im open to everything pretty much, ii just have a question. can you reuse the stock lifters on the new cam?

 

[retorq]

If you have roller lifters yes, if you have hydraulic flat tappets, no. Since you have a BBTune I will assume a vortec motor, those are all roller ...

 

[blueflamed03]

yes.

 

[felskee]

thank you guys. alot. so just to make sure. will all this work?

retainers http://www.jegs.com/i/Comp-Cams/249/787-16/10002/-1

cam http://www.jegs.com/i/GM-Performance/809/24502586/10002/-1

springs http://www.summitracing.com/parts/NAL-12499224/
and id love to have 1.6 rockers but ill wait on that. if i do choose those anytime soon would these rockers work with no other mods?http://www.jegs.com/i/Proform/778/66927C/10002/-1

 

[retorq]

I wouldn't waste my time with those rockers, I would go with a full roller setup:

http://cgi.ebay.com/ebaymotors/SBC-...r_Truck_Parts_Accessories&hash=item588708e640

Also you WILL need to change the valve seals. The stock Vortec seals won't allow the lift that the LT4 hot cam has.

Are you a 2 door or a 4 door??

 

[felskee]

dos.

---------- Post added at 06:19 PM ---------- Previous post was at 06:16 PM ----------

and whats qeong with those rockers

---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------

and these? http://www.amazon.com/Competition-Cams-50416-Valve-Seals/dp/B000CIUD0M