Can we get a sticky?

[tlang]

After searching on here, other forums and amazon reviews/questions. I am not 100% sure what part number to use for the 5100's. I know this has been asked a bazillion times however I seem to be getting different part numbers. Maybe a sticky might help myself and others?

 

[tlang]

These are the numbers I found:
Front 24-186643

rear 24-186636

Here is Bilstein's site I used http://cart.bilsteinus.com/pdfs/off-road.pdf

 

[Atrus]

I am running:

Front: 24-186643
Rear: 24-187237

 

[tlang]

I am running:

Front: 24-186643
Rear: 24-187237

Are the rears long enough? My fear was they wouldnt be with z71 springs and 1.5" to 2" spacers

 

[Atrus]

I think they would be but I am not 100% certain. I am running standard Moogs (Not the HD springs) with no spacers right now and I actually had to lower the boot on the shock as it was really compressed. I had to cut the zip tie, move it further down the shock body, and put on a new zip tie.

 

[Martinjmpr]

I believe Bilstein has a chart that shows which shocks work for which lift. I specifically ordered mine for about a 2 - 3" lift over stock on my LT (running brand new Z71 springs with no spacers.)

 

[Holgrinator]

I ordered
Rear: 24-185783
Front: 24-186643

Just waiting for the fronts to show up today so I can do the install. From all the hunting I did they were the right ones (fingers crossed)

 

[02_Tahoe]

After searching on here, other forums and amazon reviews/questions. I am not 100% sure what part number to use for the 5100's. I know this has been asked a bazillion times however I seem to be getting different part numbers. Maybe a sticky might help myself and others?

The z71 and non z71 have different part numbers