Center console question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

signguy62

Member
Joined
Aug 16, 2023
Posts
61
Reaction score
30
Location
NJ
So I ordered a used console got the trim pieces, rear cubby, drink holder, but when I go to install the black box on the floor prevents the console from moving forward far enough (about one inch)!! Has anyone else had this problem or know of a fix other than cutting out a notch in the bottom of the console so it fits?
I just ran into this. Installed a center console from an 07-13 Suburban into my 07-14 Tahoe. Just used a sawzall and cut a notch in the black ABS base. Fits perfect.
 

signguy62

Member
Joined
Aug 16, 2023
Posts
61
Reaction score
30
Location
NJ
I'd really like to find one of these. They seem to be like a Unicorn.Screenshot_20230818_164359_Chrome.jpg
 

Shackman7878

Full Access Member
Joined
Oct 17, 2020
Posts
140
Reaction score
174
Location
San Bernardino
I'd really like to find one of these. They seem to be like a Unicorn.View attachment 406385
From what research it was more common on baseline Silverado, on mine I bought a Abs plastic sheet and cut it to fit then used small square of plastic on the sides to hold it.

Examples:
 

signguy62

Member
Joined
Aug 16, 2023
Posts
61
Reaction score
30
Location
NJ
The storage bin or the little mat?
Both. I bought a junk yard console and there is nothing in that spot. Don't need the rear controls. So looking for the cubby instead.
 
Last edited:

Ilikemtb999

Full Access Member
Joined
Aug 27, 2018
Posts
844
Reaction score
815
Location
Denver
Both. I bought a junk yard console and there is nothing in that spot. Don't need the rear controls. So looking for the cubby instead.
I bought some ABS 1/4” sheet and acetone welded it together to form a box. You couldn’t tell it wasn’t factory. I don’t have pics because I’ve since sold that Tahoe

It was probably $10 total and you can buy everything at any hardware store.
 

signguy62

Member
Joined
Aug 16, 2023
Posts
61
Reaction score
30
Location
NJ
I bought some ABS 1/4” sheet and acetone welded it together to form a box. You couldn’t tell it wasn’t factory. I don’t have pics because I’ve since sold that Tahoe

It was probably $10 total and you can buy everything at any hardware store.
Yeah, if it wasn't you then someone else also suggested this.
Thanks!
 

Shackman7878

Full Access Member
Joined
Oct 17, 2020
Posts
140
Reaction score
174
Location
San Bernardino
Yeah, if it wasn't you then someone else also suggested this.
Thanks!
how it looked version 1, If I get more time I might try and 3d Print something
 

Attachments

  • 292182752_394882555956075_3255508428946228524_n.jpg
    292182752_394882555956075_3255508428946228524_n.jpg
    383.4 KB · Views: 5
  • 292226078_1068524034078431_6381704759311696084_n.jpg
    292226078_1068524034078431_6381704759311696084_n.jpg
    336.5 KB · Views: 5

Forum statistics

Threads
132,301
Posts
1,865,657
Members
96,888
Latest member
madmoney

Latest posts

Top