I have a black '04 Z71 that used to be the family hauler, but is now my weekend/tow vehicle.
I have used many of the product/product lines offered by Meguires and Mothers to very good effect, but happened upon Poor Boys products at a car show. Excellent products with a responsive Forum website where the company owner often responds to posted questions.
Was advised to check out the Auto Geeks website and armed myself accordingly to restore the Z71's finish. Once you get the paint shaped up it's easy to maintain with detailers and non-cleaning wax/sealer, especially if your vehicle is garage kept.
The regimen:
- Clay Bar to clean the paint. Use with any Quick Detailer. Meguire’s makes a kit that I found at Walmart. Dry with microfiber towels.
- You may want to consider masking off your plastic trim with blue painter’s tape at this point, especially if you plan on using a buffer
- Poor Boys Pro-Polish to remove fine scratches/swirls or Pro-Polish 2 for heavier scratches. Any clear coat safe rubbing compound can carefully be used to take out or minimize a deep clear coat scratch.
- Poor Boys Black Hole Glaze; 1 application. Fills in minor imperfections and adds depth. Awesome for dark colors.
- Poor Boys EX-P Sealant; 2 applications. Take your time with this to get total coverage, adhering to instructed wait times; one hour before removal & the second application the next day. Your base finish is now complete.
- Top coat with Poor Boys Natty’s Black Paste Wax or, if you prefer liquid, Natty’s Liquid Blue; 1 or 2 applications.
- Poor Boys Bold N Bright Tire Dressing.
- Mother’s Chrome Polish for the Wheels. Poor Boys Wheel Sealant for painted wheels.
- If your plastic exterior trim starts fading, Poor Boys Trim Restore works great.
- Einszett Premium Cockpit Cleaner will clean all interior surfaces leaving no residue; works great for matte-finishes.
- Poor Boys Spray and Gloss detailer for light dust between washes. This stuff leaves the finish with that just waxed look. I also have the QD+ detailer, but have found that a bit trickier to use on dark colors as it is prone to streaking if you use too much (guilty as charged).
I have a Porter-Cable buffer I use only for polishing. All other products I apply/remove by hand. Auto Geeks has good quality microfiber towels that I use for anything to do with the paint and keep them segregated from the towels I use for other things; washing them separately. I find that the 16x16 size works good for product removal because you can fold them over a couple of times, getting alot of use per towel. The Walmart microfiber towels are good enough for wheel/interior cleaning.