M1Gunner
Full Access Member
^^^lmao
Cluster Not Working
- Thread starter Tonyrodz
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Tonyrodz
Resident Resident
Good news, it works now. I plugged in the old cluster, which worked, I then replugged in the Escalade cluster, and I heard the motors whirring, a8it works now. Must've been something loose. I'm not gonna complain. Hopefully it'll stay working.
Old cluster.
Escalade Cluster.
Old cluster.
Escalade Cluster.
Of course, it thinks it has the 5.3 in it again lol.
M1Gunner
Full Access Member
Ha! IT’S ALIIIIVE!!!! That’s awesome, hopefully it stays all good brother!
OP
OP
Tonyrodz
Resident Resident
C'mon Red, remember, it had the 4.8 in it.
Im hoping. Machines are a strange animal. Thx @M1Gunner for the help. You too @ScottyBoy.
Oh yeah, a 4.8. No wonder it had a cluster f*ck lol.
ScottyBoy
Full Access Member
It's very possible that it was something as simple as a loose connection or a bad connection. I've had some circuits act up before and they mysteriously started working just fine after unplugging the harness and plugging it back in, or pulling the fuse and putting the fuse back in.
Had this issue myself but with the stock cluster. I had to pull the fuses out and slide them back in and it worked. Turned out to be corrosion on the fuses. I replaced the fuses and hadn’t had a problem since. If it happens again like mine did about 10 Times may try replacing the fuses even though they’re good. Or swap back to a 4.8l. Either way
OP
OP
Tonyrodz
Resident Resident
Never!!
Lol can’t say I blame you
Similar threads
