Copper&Black's Complete Custom Build Thread
- Thread starter Copper&Black
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Copper&Black
Full Access Member
- Joined
- May 4, 2009
- Posts
- 641
- Reaction score
- 10
You are more then welcome to come by even if I don't need a set of hands. But I do need a hand with that bottle of Don Julio we never poped open...Have a Merry Christmas man.
Merry Christmas Guys!
---------- Post added at 02:33 PM ---------- Previous post was at 01:35 PM ----------
Haven't bought from them yet, but I have heard good things. I'll let you know when it gets to me.
Merry Christmas Guys!
---------- Post added at 02:33 PM ---------- Previous post was at 01:35 PM ----------
Haven't bought from them yet, but I have heard good things. I'll let you know when it gets to me.
BlackDenali
Roof Rack ****
You too!!! We'll do both this time, drinking and working 
kirkpatrickdg
TYF Newbie
when you did your doors did you lay a layer down behind the window on the inside skin of the door the panel or just the interior pannel facing the inside of the car? if that makes sense?
OP
OP
Copper&Black
Full Access Member
- Joined
- May 4, 2009
- Posts
- 641
- Reaction score
- 10
It does, Actually I did it only on the exterior panel, b/c I didn't know how far my boxes of dynamat would go, and I did the doors first. But I am going to do the interior panel with the dynamat I have left. It will def. help reduce the road noise.
Last edited:
kirkpatrickdg
TYF Newbie
how much speaker wire did you use in your install? I got my dnx 9140 in and have my focals coming this week. just need to order my speaker wire you think 125 feet would be enough to do from under second row amp rack to focals components up front and in rear doors and 2 diamond audio d6 10s right behind the seat?
OP
OP
Copper&Black
Full Access Member
- Joined
- May 4, 2009
- Posts
- 641
- Reaction score
- 10
You could get away with 100' if the amps are under the rear seat and have plenty for the small sections leading from the crossovers to the components. Of course you should be running larger gauge wire to the subs, so about 15' of that to give yourself some slack should you need to slide the box from one side or the other for large cargo. Thats the way I would do it.
I ran nearly 200' due the the 8 speaker setup, and the amps will be above the rear wheel well.
I ran nearly 200' due the the 8 speaker setup, and the amps will be above the rear wheel well.
kirkpatrickdg
TYF Newbie
I was planning on running 12 ga for the speakers and 10 ga for the subs.
Just excited for all the parts to show so i can get it all put together.
Just excited for all the parts to show so i can get it all put together.
kirkpatrickdg
TYF Newbie
you happy with the 16 ga wire or do you wish you went for the 12? its a $20 difference what are your thoughts?
