Custom Wheels

[Tk59194]

Ok get the springs and shock extenders. When you do the job you’ll shorten the actuator rods which you can use threaded rod for. You can get a kit from Tony @NORCAL SS

Thank you. I sent him a message.

 

[Staggered 02]

24" Staggered offset Asantis on the 2005 Escalade. Sold the Escaladw a short time after I picked up the 2015.


26" Staggered offset Intros on the 2015 Escalade.

 

[Lalo]

 

[wjburken]

View attachment 236717

I don’t say this very often because it’s not my thing, but those wheels would look really good with your rig lowered.

 

[lynxnova]

24" Staggered offset Asantis on the 2005 Escalade. Sold the Escaladw a short time after I picked up the 2015.


26" Staggered offset Intros on the 2015 Escalade.

View attachment 235142 View attachment 235143 View attachment 235144

Hey staggered, how much rubbing do you have front and rear?


Sent from my iPhone using Tapatalk

 

[Staggered 02]

Hi Alex, No rubbing in the rear. Slight contact on full lock and only at full lock in either direction left or right. Thanks.

 

[lynxnova]

Hi Alex, No rubbing in the rear. Slight contact on full lock and only at full lock in either direction left or right. Thanks.

That’s sounds good enough for me. I spoke with NorCal and he has some fender mod for our trucks that will help with the running. I’m waiting to put my wheels on before I hit him up again for the mod. Thanks again staggered it’s always good to know we have people like you to help us out. [emoji1374]


Sent from my iPhone using Tapatalk

 

[lynxnova]

That’s sounds good enough for me. I spoke with NorCal and he has some fender mod for our trucks that will help with the running. I’m waiting to put my wheels on before I hit him up again for the mod. Thanks again staggered it’s always good to know we have people like you to help us out. [emoji1374]


Sent from my iPhone using Tapatalk

^rubbing


Sent from my iPhone using Tapatalk

 

[Staggered 02]

^^^ you are welcome sir. I'll get in touch with NORCAL as well to discuss details of fender mods. Not for the Escalade as I am good with the stance and the ride height. But maybe we can identify some similarities that will help with the Duramax mod effort.

Thanks again.

 

[CMoore711]

Though this video is for a Sierra, the process is similar. And the location of your wheel rubbing is exactly the same, unless your lifted and fitting wheels that are wider, with lower offset, and larger diameter you could have some rubbing in the front.

Also, pay attention to what you're doing depending on the type of side steps you have; fixed or power-retractable. I've tried to find videos specific to our SUV's but haven't come across any.