Diff Covers?

[vjr021]

Any further progress on this subject?

I want to do the Mag-Hytec covers as well, but I hear they won't clear the Spohn Panhard.

 

[Travieso]

Any further progress on this subject?

I want to do the Mag-Hytec covers as well, but I hear they won't clear the Spohn Panhard.

I doubt if a Mag-Hytec Cover will fit, this one barely clears the Panhard bar, so i would say no on the Mag one.

When i get a few funds i'm gonna purchase this.

 

[vjr021]

I emailed Mag-hytec directly, they confirmed it will not fit with out "modification".

I asked for clarification, but they said it is custom work, they couldn't answer.

I would think spacing out the panhard bar is a bad idea.

Thoughts?

 

[Travieso]

IMO I wouldn't mess with the panhard/swaybar at all. if you look at the Differential Cover from ebay it only has 0.5 qt. over stock, im pretty sure the Mag-hytec cover has alot more volume then that, that's probably why it needs "modification" I kinda wish i found this Differential cover when i was building my rear end.

 

[THE YETI]

I had a slim model of a diff cover, can't remember the brand. It wasn't a Mag-Hytec though. It was about 3/4-1" slimmer than the normal diff cover.

 

[Wake]

I seriously doubt this is any room for a bigger nice one on a NNBS. The panhard is right in front of it.

I noticed that when I looked at aftermarket covers with a drain plug, it's pretty tight.

 

[candyman74]

my truck is at the shop now getting the rear end done and ill tell ya if the ta 1807a cover fits or not

 

[candyman74]

Well damn the luck. The ta 1807a diff cover will not fit with an aftermarket panhard bar. So I might have to have my bar modified