DIY advice

[Hey you]

OK, I am getting ready to change plugs, wires and coils on my 2015 Tahoe, with the 5.3 motor. Its a 2wd. Plan to remove passenger front
wheel, and fender lining for access on that side. Hoping the driver side will be easier.
I am doing this as what I thought was a transmission stutter, was diagnosed as a miss fire. I intend to do the plugs/wires/coils first. If this works
great! If not it will be back to the drawing board!
Has any one done this before, and can you provide any tips that may help?
Thanks in advance....

 

[89Suburban]

Look at this socket setup for the #8 plug on pass side rear.

Tahoe #8 Spark Plug access

@Rocket Man came up with a great way to remove it. Use a long enough deep 5/8" socket, not a spark plug socket, and a 3/8" ratchet and it works. If you have a deep 5/8" 1/4'' drive socket that you can use with a 1/4" ratchet and break loose, that works too. I have a 1/4" breaker bar to break it...

www.tahoeyukonforum.com