Does anyone know if you can put a Chevy Bowtie on the rear of an 03 Tahoe ?

[ChevyMan954]

I’ve been customizing my truck like crazy in the past month and I saw some guy with a 2nd gen Tahoe like mine with a bowtie on the rear and that’s only normally for the 3rd gens and up…So I was trying to find it on Amazon and basically it said it wouldn’t fit my 03…how the hell did that guy manage to do it then ??…pretty sure it’s easy and I’m an idiot lol but I just want to get some advice

 

[bigdog9191999]

most likely double sided tape. it says dont fit because that isnt the style badge for that year is all.

 

[OR VietVet]

What @bigdog9191999 said and lots at ebay.

 

[89Suburban]

most likely double sided tape. it says dont fit because that isnt the style badge for that year is all.

Yup and use the 3M stuff.

 

[ChevyMan954]

most likely double sided tape. it says dont fit because that isnt the style badge for that year is all.

Ok so any badge would work with double sided tape ?

 

[OR VietVet]

As long as it is straight, yep. The thinner the double sided tape and a 3M product, the better.

Sometimes you find just the BowTie badge you want and it will have a couple tabs on the back, like for mounting at the front grille. I have seen where those tabs were removed and sanded/rubbed down flat and then use the double sided tape.

 

[ChevyMan954]

As long as it is straight, yep. The thinner the double sided tape and a 3M product, the better.

Sometimes you find just the BowTie badge you want and it will have a couple tabs on the back, like for mounting at the front grille. I have seen where those tabs were removed and sanded/rubbed down flat and then use the double sided tape.

Ok noted, thanks

 

[bigdog9191999]

what those guys said. custom comes with a certain amount of ''do what you want'' and ''make it work''.