Drop kit missing autoride links

[willinnashville]

Hey everyone -

I have a Belltech 34324 rear drop kit that I'm looking to install this weekend on my 2005 Yukon Denali with autoride, but I just noticed that I don't have the autoride threaded links in the kit anymore. Dunno if the kit didn't come with them or I just lost them. Anyone got an idea how I can get around this? I'm also not really sure how long they're supposed to be. The links look like this:



Thanks in advance

 

[willinnashville]

OK actually, the instructions say the new links should be roughly 3" from center to center, so that question is answered

 

[willinnashville]

After some panicked searching, I ran across this post in the other generation section. Looks like this worked for them, so I'm gonna give it a shot

Help with making my own AUTORIDE LINKS, please!

Trying this in this section, too... Hey all, So the 2-1/2" links supplied with the Belltech rear lowering kit are too short (they'd be perfect if the front were lowered, too), and the factory ones are too long. I'd like to make my own links that split the difference between the two. Am...

www.tahoeyukonforum.com