Dropped it 4"- 5"

[ghost]

wow! 31.5 is pretty damn low. will tonys kit sit that low? im runnin 285/35/22s and sittin about 33.5.. his coil is spose to sit lower than the 5305 too. so im wondering if id be around 31.5?

---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------

and good luck with the sale man, if i had the money id like to get somethin like that!

 

[ILLEGAL REGAL]

wow! 31.5 is pretty damn low. will tonys kit sit that low? im runnin 285/35/22s and sittin about 33.5.. his coil is spose to sit lower than the 5305 too. so im wondering if id be around 31.5?

---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------

and good luck with the sale man, if i had the money id like to get somethin like that!

I sure would like to know.. I'm at 33.25" in the rear and 29.75" in the front and need to close the difference some on the ass end

 

[ghost]

what set up you runnin aaron?

 

[ILLEGAL REGAL]

2" spindles up front with mcgaugys 5" springs out back on 285/35/24 rubber

 

[NathanJax]

My buddy just scooped a new cayenne turbo and the thing is just stupid fast, way nicer than the last generation turbo he had and they handle exceptionally well for a big suv...with no bloody knuckle mods necessary.

Just ready to step up in the vehicle world... Esky was nice, now on to bigger and better.

No crap I'd get a used Ferrari 360 if my wife would let me. She says no to payments, so all my vehicles are paid for cash. I can get a used one for about $70k and put $25k down...

wow! 31.5 is pretty damn low. will tonys kit sit that low? im runnin 285/35/22s and sittin about 33.5.. his coil is spose to sit lower than the 5305 too. so im wondering if id be around 31.5? and good luck with the sale man, if i had the money id like to get somethin like that!

Not sure. I asked him about it on *** and it might be around an inch lower, but I also have bags to raise it up to even everything out. I was going to try his springs out, but I decided to just get rid of it. For some reason, these springs just dropped the crap out of it. I have to put some air in the bags or my rear end hits my frame with bad bumps

 

[ghost]

awesome, well it looks sick man and honestly after reading a 1000 of these threads, 31.5 is one of the lowest ones ive seen. theres a few people with the tb set up but there sittin around 32.5.. just debating on which route to go, im sold on the tb set up just would like to know if i can run it with out the rear hardware kit, and how low it would be of corse.

 

[NathanJax]

awesome, well it looks sick man and honestly after reading a 1000 of these threads, 31.5 is one of the lowest ones ive seen. theres a few people with the tb set up but there sittin around 32.5.. just debating on which route to go, im sold on the tb set up just would like to know if i can run it with out the rear hardware kit, and how low it would be of corse.

Like I said earlier with air in the bags to keep the axle from hittin on big bumps, it rides right around 32 inches. It will lift around 3-4 inches with the bags full.

Kinda hard to take a pic while holding the measuring tape but you get the idea...





I want to say with those 20's it sat around 30 1/2 or so... small rim/tire combo...

 

[Max]

I loved my 5305 coils and mine sat at the same height with the big tires on my 20s, now I'm at 31" all 4 corners on 30.5" tall tires and it rides great.

 

[ghost]

nice max! i like the denali, its sick! what set up are you runnin?

 

[Max]

Thanks dude! I'm running almost the same setup as Nathan I just have belltech 4" trailblazer coils out back for a bit more drop. I'm honestly happy, after 5 different coil setups and all kinds of quirky shit it really rides nice and handles quite well for being so damn heavy. The 21.5" extended length bilstein 5100s out back really made a difference with the new coils and the eibach sways are a great investment if you like hitting corners and have the tires to back it up.