e- fan control

[blue99tahoe24]

whats up guys my e-fan controller keeps goin out and i bought another and its on its way to the grave anyone had this problem or can i wire it direct to something a buddy of mine said when he had his trans am he wired it to the starter so when he turned the key the fan ran thanks

 

[SunlitComet]

I suggest you look at getting a different controller or look at your equipment for an unresolved faults.

 

[AtomicHoe094]

yea i wouldnt run it to the starter. the objective of the fans is not to run all the time (hooking it up to the starter would do this)...

You need them to run when it hits a certain temperature then they wouldnt turn off after its cooled down..
Flexalite sells a good controller or im sure perma cool. something name brand would be best..

Have any type of relays hooked up to your fans now?

 

[blue99tahoe24]

its built into the controller

 

[AtomicHoe094]

made by who??

 

[blue99tahoe24]

hyden and the one before was made by torque flo it saw clicking and i pushed on it and it start working

 

[SunlitComet]

you sure you don't have a bad fan or bad connections other then the relay controllers. like grounds or something.

 

[blue99tahoe24]

grounding is solid im pretty sure its not the fan

 

[SunlitComet]

If you eliminate the impossible, whatever remains, however improbable, must be the truth.

 

[ezdaar]

If you eliminate the impossible, whatever remains, however improbable, must be the truth.