DJPoertsch
Full Access Member
- Joined
- Mar 7, 2018
- Posts
- 115
- Reaction score
- 76
Dear friends here from the forum.
I'm a little desperate. I have had the engine indicator light on the display for a long time. I have read out the control unit and now have the following error codes
P0064
P0060
P0420
P0430
p0446
On the picture only P0420 is seen. But I always get the P0430 now also showing. The Picture is 1 Month old, but i was cleared codes 5 days ago so i was seen 5 codes.
what I have already exchanged and changed the following on my car
Complete catalytic converters
4 Oxygen sensors
Acdelco Vapor Canister Purge Valve
Solenoid Canister Purge Control
What I would think of now would be the gasoline pump pressure switch. But this pump was also replaced in June 2019. In point of the P0446 Code
Could it be that my catalytic converter is defective again? I had bought this new on Ebay. It was difficult from the start because it didn't fit 100% in size. Those who buy cheap will probably buy twice.
Also, I have to tell you, that I drive my car with an LPG Liquid Patrol Gas system. But this system runs fine without Problems. Also, what I was figured out, that the DTC Codes will come on in the morning when I start my Car and drive about 2 mls. If I have to change the catalytic converters again, would it makes sense to get some Walker universal converters here in Germany that work up to 6,2 l engine and welding it in or by again a full system with pipes. If you recommend a full system I have an account at Rock Auto witch one there would be the best. I am now at the end of my technical experience on that Car now.
Could you please give me another tip on what I could do after all. Because ordering parts from Germany is often not that easy. Thanks to you
View attachment 237033
I'm a little desperate. I have had the engine indicator light on the display for a long time. I have read out the control unit and now have the following error codes
P0064
P0060
P0420
P0430
p0446
On the picture only P0420 is seen. But I always get the P0430 now also showing. The Picture is 1 Month old, but i was cleared codes 5 days ago so i was seen 5 codes.
what I have already exchanged and changed the following on my car
Complete catalytic converters
4 Oxygen sensors
Acdelco Vapor Canister Purge Valve
Solenoid Canister Purge Control
What I would think of now would be the gasoline pump pressure switch. But this pump was also replaced in June 2019. In point of the P0446 Code
Could it be that my catalytic converter is defective again? I had bought this new on Ebay. It was difficult from the start because it didn't fit 100% in size. Those who buy cheap will probably buy twice.
Also, I have to tell you, that I drive my car with an LPG Liquid Patrol Gas system. But this system runs fine without Problems. Also, what I was figured out, that the DTC Codes will come on in the morning when I start my Car and drive about 2 mls. If I have to change the catalytic converters again, would it makes sense to get some Walker universal converters here in Germany that work up to 6,2 l engine and welding it in or by again a full system with pipes. If you recommend a full system I have an account at Rock Auto witch one there would be the best. I am now at the end of my technical experience on that Car now.
Could you please give me another tip on what I could do after all. Because ordering parts from Germany is often not that easy. Thanks to you
View attachment 237033