I drive a '98 Tahoe 2DR 4WD with the 350 Vortec.
For a few weeks I've had the check engine light on. Code reader says it's a cylinder 4 misfire. Truck shakes pretty good when idling, and smooths out when over about 1200 rpm.
So far I've changed the spark plug, spark plug wire, distributor cap, and the rotor under the cap, and it's still misfiring. I also ran a compression check and it came back at 150 psi which is well within spec.
Failing to find the problem, I took it to a Chevy dealer. They couldn't find anything wrong either. Their suggestion to me was to do a tune-up, hence the new distributor cap and rotor (only part of a tune-up I hadn't already done).
Has anyone else had this problem? Anyone have an idea what I should try next?
For a few weeks I've had the check engine light on. Code reader says it's a cylinder 4 misfire. Truck shakes pretty good when idling, and smooths out when over about 1200 rpm.
So far I've changed the spark plug, spark plug wire, distributor cap, and the rotor under the cap, and it's still misfiring. I also ran a compression check and it came back at 150 psi which is well within spec.
Failing to find the problem, I took it to a Chevy dealer. They couldn't find anything wrong either. Their suggestion to me was to do a tune-up, hence the new distributor cap and rotor (only part of a tune-up I hadn't already done).
Has anyone else had this problem? Anyone have an idea what I should try next?