Exhaust recommendations

[Furd Killa]

I want a new exhaust setup I have the 5.7vortec I want it to be as loud as a straight pipe but without the crackle raspy sound I would like a deep performance sound with a ton of volume even at idle. As well as lots og flow. I was thinking long tubes to start. Anyone have any recommendations? I've noticed my vortec is quite a bit quieter then my TBI 350.

 

[bowtiefreak]

long tubes to Glass packs?

 

[Furd Killa]

long tubes to Glass packs?

With no cats or what? Would I have enough back pressure? And how big of diameter would you recommend? Is 3" too big?

 

[retorq]

LOL backpressure. I can tell you won't take anyone's advice seriously so save everyone the hassle and just redneck out your truck.

 

[Furd Killa]

LOL backpressure. I can tell you won't take anyone's advice seriously so save everyone the hassle and just redneck out your truck.

Wtf? Whats your problem? Why would I ask if I didn't want advice..?

 

[year_one]

long tubes to glass packs no cats would be loudest. i would personally go with a set of cherry bomb vortec mufflers. if you are worried about back pressure then run a set of non mandrel bent 2.5" duals out the back. anything above 2.5" on a motor running less than 450 hp is a waste.

 

[livingez_123]

He's 21, what do you expect? everyone went through a loud exhaust phase, I'm just glad mine was 37 years ago.

Long tube headers, 2.5 inch pipes to dual 3" glass packs (yes I said 3" there is a reason for that) or maybe dual 10 series Flowmasters. Then it's your choice to go with tail pipes or not.

 

[bowtiefreak]

I personally run shorties, magnaflow cats, borla mufler. Any muffler will quiet the truck down. Put some exhaust by-passes in there and give your self the option of straight out or with mufflers.

 

[autolover3]

I've noticed the crackle is common with vortecs... Could just be me though. I'm running longtubes with 2.5" duals y'd into single 3" no mufflers or cats. Its loud as hell but crackles down low. I just ordered a Flowmaster super 44 3" SI/SO with rest of my engine stuff to help bring noise down a little but should still be loud with a better note to it.

---------- Post added at 03:49 PM ---------- Previous post was at 03:37 PM ----------

Also the cutouts idea wouldn't be a bad idea, could run cutouts for when ya wanna be loud and run FM 70 series if ya wanna be quieter with a classic muscle sound.

No need to worry about backpressure, velocity and scavenging is the ticket.

 

[00Caddy]

I went with loud route once... Longtubes, 3 inch exhaust, to 50 series with a tailpipe out the back. It was annoying as hell! Glad i dont have that anymore! That was with a 50 series flowmaster.... Seriously save yourself some money and just put a flowmaster 70 series or the biggest magnaflow muffler and put some cutouts in front of the mufflers.

---------- Post added at 01:00 PM ---------- Previous post was at 01:00 PM ----------

When i say save yourself some money... I meant that for when you change your exhaust 2 months after you realize the loud part is only cool sometimes and not all the time...