Finally got my housing changed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
Any way I can get the new driver side housing to fit as flush as passenger side? Both are after market housings. Did I do something wrong
 

Attachments

  • IMG_4597.jpeg
    IMG_4597.jpeg
    191.7 KB · Views: 7
  • IMG_4598.jpeg
    IMG_4598.jpeg
    213.6 KB · Views: 6
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
Seems like ever since I took the driver side out I haven’t been able to get the old one or the new one to fit right.
 
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
A year ago vs now. I know it can be done. The old one was aftermarket and fit perfectly.
 

Attachments

  • IMG_4599.png
    IMG_4599.png
    897.3 KB · Views: 5
  • IMG_4598.jpeg
    IMG_4598.jpeg
    213.6 KB · Views: 5
Joined
Apr 11, 2018
Posts
7,124
Reaction score
14,364
Location
St. Louis
You talking about the gap underneath and the top edge not lining up with the center grill?

If so, that has to do with the front bumper cover alignment. There should be some play if you loosen the bolts across the front above the grill
 
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
You talking about the gap underneath and the top edge not lining up with the center grill?

If so, that has to do with the front bumper cover alignment. There should be some play if you loosen the bolts across the front above the grill

Hm I never removed any of the bumper cover bolts. Just removed the wheel well splash shield partially and than partially removed the bumper cover as well just enough to take the housing out
 
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
You talking about the gap underneath and the top edge not lining up with the center grill?

If so, that has to do with the front bumper cover alignment. There should be some play if you loosen the bolts across the front above the grill

Like you’re saying if I loosen the bolts a bit I can get it where I want to? That makes sense if that’s what you mean
 
Joined
Apr 11, 2018
Posts
7,124
Reaction score
14,364
Location
St. Louis
Probably. The front bumper cover has a hard foam insert across the front that fits pretty snug into a horizontal groove in the metal front bumper to help support it, but the bolts across the top above the grill and in front of the radiator cover do allow for adjustment of where that entire thing lines up.

Pic of my Yukon with front bumper cover off, but a Tahoe is the same. Only bolts holding bumper cover on are across the top, a coupe in each wheel well, and one on each side underneath behind the fog light/tow hook area.

20200307_123409.jpg
 
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
Probably. The front bumper cover has a hard foam insert across the front that fits pretty snug into a horizontal groove in the metal front bumper to help support it, but the bolts across the top above the grill and in front of the radiator cover do allow for adjustment of where that entire thing lines up.

View attachment 432858

I tried taking it apart again I couldn’t figure it out lol. Can you be more specific about this Groove the bumper goes into? That seems like it would help me.

Tbh I might just leave it. I know the headlight is secure. It seems the bumper is just a few hairs off. But I dont think it is affecting anything
 
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
765
Reaction score
413
Starting to think it’s just the headlight housing idk.
Probably. The front bumper cover has a hard foam insert across the front that fits pretty snug into a horizontal groove in the metal front bumper to help support it, but the bolts across the top above the grill and in front of the radiator cover do allow for adjustment of where that entire thing lines up.

Pic of my Yukon with front bumper cover off, but a Tahoe is the same. Only bolts holding bumper cover on are across the top, a coupe in each wheel well, and one on each side underneath behind the fog light/tow hook area.

View attachment 432858


I wouldn’t need to remove any bolts if I didn’t remove any in the first place, or?

I must’ve just pulled the bunper cover to hard and than wasn’t able to properly align it on this alleged groove. Idk.
 
Joined
Apr 11, 2018
Posts
7,124
Reaction score
14,364
Location
St. Louis
I tried taking it apart again I couldn’t figure it out lol. Can you be more specific about this Groove the bumper goes into? That seems like it would help me.

Tbh I might just leave it. I know the headlight is secure. It seems the bumper is just a few hairs off. But I dont think it is affecting anything
I updated my above post with a pic.

Shouldn't have to remove the entire bumper. There are like 4-6 10mm bolts across the top and I think 1 7mm bolt on each side (at least on my Denali bumper cover, a Tahoe may not have those 7mm bolts). Loosen all those up and grab the bumper under the grill opening with one hand and lift up while tightening a couple of the 10mm bolts across the top.
 

Forum statistics

Threads
132,359
Posts
1,866,605
Members
96,980
Latest member
sLickNick
Top